New Beginning for 2022

What is your latest project?
stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Fri Nov 04, 2022 9:55 pm

Ref air controlled points.

It was a no brianer for me in north east England. Keeping the power connection to the track reliable is hard enough through the winter.

With the SVR kit I have had no failures since 2016 except snagged air lines due to being buried by me (lesson learned)

Reashearching it since I have discovered the components are produced by a company called Clippard. I have also very recently replaced all of the point actuator components with my own 3D printed version (using the original cylinders), pictures to follow.

I have had literally zero problems with it except the buried tubes (why did I think that was a good idea!) and would highly recommend over electric.. If anyone wants any LGB electric motors I've got a box full!
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: New Beginning for 2022

Post by ge_rik » Sat Nov 05, 2022 8:54 am

stevenfitch wrote: Fri Nov 04, 2022 9:55 pm .. If anyone wants any LGB electric motors I've got a box full!
Yes please. I use LGB point motors as I already had the wiring in place from when I was using track power. After a while, they do deteriorate (usually the coil wires erode - really tricky to repair) so it would be good to have a couple of spares.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Sun Nov 13, 2022 3:56 pm

3D printed some spacers for fitting the boards on top of the runners
The gaps allow wiring to come through as close to where its needed so all hidden
IMG_20220917_153045_722.jpg
IMG_20220917_153045_722.jpg (5.73 MiB) Viewed 4663 times
Track then sits on top of that, still to come up with a good way of securing down without directly screwing it to the boards. I think i'll end up designing printing some kind of brace that goes over a sleeper (or two) and then the brace is screwed down.
IMG_20220907_164225_443.jpg
IMG_20220907_164225_443.jpg (6.25 MiB) Viewed 4663 times
Tested 3D printed signal for fitting
IMG_20220914_190911_402.jpg
IMG_20220914_190911_402.jpg (3.82 MiB) Viewed 4663 times
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Sun Nov 13, 2022 4:47 pm

The smaller loop returning to the garage and the junction towards the main loops is complete and working
IMG_20221113_161707_150.jpg
IMG_20221113_161707_150.jpg (3 MiB) Viewed 4659 times
IMG_20221113_161712_625.jpg
IMG_20221113_161712_625.jpg (2.76 MiB) Viewed 4659 times
IMG_20221113_161811_677.jpg
IMG_20221113_161811_677.jpg (2.55 MiB) Viewed 4659 times
Also, all wiring and air lines are contained inside this split conduit fastened under the road bad but well above ground level
IMG_20221113_161726_565.jpg
IMG_20221113_161726_565.jpg (2.85 MiB) Viewed 4659 times
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

Mamod sterling
Cleaner
Cleaner
Posts: 18
Joined: Mon Sep 12, 2022 12:36 pm

Re: New Beginning for 2022

Post by Mamod sterling » Mon Nov 21, 2022 12:42 pm

Nice work Steve.

Goes to show, once you have a 3d printer, you always find a reason to use it!

Thanks
Paul.
Mamod SL1 - ripe for modification
Mamod Brunel - ongoing modification
IPE Jane - rebuilt from 45mm to 32mm gauge, 'globetrotter'

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Tue Dec 06, 2022 4:45 pm

Mamod sterling wrote: Mon Nov 21, 2022 12:42 pm Nice work Steve.

Goes to show, once you have a 3d printer, you always find a reason to use it!

Thanks
Paul.
Absolute game changer when you can just make pretty much anything exactly as you need
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Sat Feb 04, 2023 3:45 pm

So to give a brief update on this, the initial loop that was completed is still in place and was covered in ice and snow for a few weeks solid recently.
I powered it up this week and the Allegra went straight round first time without issues or any track cleaning.
Very happy with the new trackbed and cabling so far and will be rolling out to the rest of the garden as i go when the temperatures get up a bit.
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: New Beginning for 2022

Post by ge_rik » Sat Feb 04, 2023 5:12 pm

stevenfitch wrote: Sat Feb 04, 2023 3:45 pm So to give a brief update on this, the initial loop that was completed is still in place and was covered in ice and snow for a few weeks solid recently.
I powered it up this week and the Allegra went straight round first time without issues or any track cleaning.
Very happy with the new trackbed and cabling so far and will be rolling out to the rest of the garden as i go when the temperatures get up a bit.
That's good to hear.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Fri May 12, 2023 3:10 pm

A slight diversion away from actual railway progress to convert the whole garage to a solar island system with mains bacckup.
IMG_20230512_130749_132.jpg
IMG_20230512_130749_132.jpg (4.87 MiB) Viewed 3667 times
IMG_20230502_165027_098.jpg
IMG_20230502_165027_098.jpg (2.69 MiB) Viewed 3667 times
800 watts of solar into battery storage.... Now thats up and running on with some railway progress
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Fri May 12, 2023 3:23 pm

General progress building the plastic roadbed, hoping to get a load more done this wekeend if the weather holds.
IMG_20230503_170734_438.jpg
IMG_20230503_170734_438.jpg (5.6 MiB) Viewed 3666 times
IMG_20230502_164949_066.jpg
IMG_20230502_164949_066.jpg (6.86 MiB) Viewed 3666 times
IMG_20230503_170745_823.jpg
IMG_20230503_170745_823.jpg (6.94 MiB) Viewed 3666 times
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: New Beginning for 2022

Post by ge_rik » Fri May 12, 2023 6:55 pm

Corrr that looks good .....

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Wed May 24, 2023 8:20 pm

A bit more progress with road bed complete and track laid out.

Next up is connecting wiring for block sections and finishing off the pneumatics for the points.
IMG_20230521_172551_500.jpg
IMG_20230521_172551_500.jpg (3.9 MiB) Viewed 3577 times
IMG_20230521_172617_726.jpg
IMG_20230521_172617_726.jpg (3.27 MiB) Viewed 3577 times
IMG_20230521_172607_212.jpg
IMG_20230521_172607_212.jpg (3.98 MiB) Viewed 3577 times
IMG_20230521_172512_327.jpg
IMG_20230521_172512_327.jpg (3.81 MiB) Viewed 3577 times
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: New Beginning for 2022

Post by ge_rik » Wed May 24, 2023 8:45 pm

That junction looks tasty! 👍

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: New Beginning for 2022

Post by Andrew » Thu May 25, 2023 8:20 am

ge_rik wrote: Wed May 24, 2023 8:45 pm That junction looks tasty! 👍
That's exactly what I thought!

Can't wait to see some trains making their way through that!

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Sat May 27, 2023 1:00 pm

Andrew wrote: Thu May 25, 2023 8:20 am
ge_rik wrote: Wed May 24, 2023 8:45 pm That junction looks tasty! 👍
That's exactly what I thought!

Can't wait to see some trains making their way through that!
As you wish...
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: New Beginning for 2022

Post by ge_rik » Sun May 28, 2023 8:23 am

Captivating to watch. Do the train movements follow a prescibed pattern or is there a random element as to which train moves next?

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Sun May 28, 2023 11:40 am

ge_rik wrote: Sun May 28, 2023 8:23 am Captivating to watch. Do the train movements follow a prescibed pattern or is there a random element as to which train moves next?

Rik
They were running on some pre-set looping schedules which activate each other but can also push a couple of buttons to just run at random.
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: New Beginning for 2022

Post by ge_rik » Sun May 28, 2023 12:04 pm

I'll bet it's great just to sit with a glass of something cool on a summer's evening and watch the trains pass by, never quite knowing what will appear next .... :thumbup:
Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: New Beginning for 2022

Post by Andrew » Tue May 30, 2023 9:26 am

Brilliant stuff, thanks for the video!

I agree with Rik, it must be great to watch sit back and watch the trains roll by. I particularly like the shot about 5 minutes in, where two trains arrive in the yard from different routes and run parallel for a while. I'm quite taken with that three car EMU as well...

Thanks,

Andrew.

stevenfitch
Trainee Fireman
Trainee Fireman
Posts: 223
Joined: Thu Feb 19, 2015 7:46 pm
Location: Northumberland UK

Re: New Beginning for 2022

Post by stevenfitch » Sun Jun 11, 2023 2:35 pm

After several thoughts on how to secure the track to the road bed I came up with these 3D printed blocks with a screw in the middle.
IMG_20230610_104217_363.jpg
IMG_20230610_104217_363.jpg (2.71 MiB) Viewed 3222 times
IMG_20230610_104147_249.jpg
IMG_20230610_104147_249.jpg (1.54 MiB) Viewed 3222 times
IMG_20230610_104214_554.jpg
IMG_20230610_104214_554.jpg (2.91 MiB) Viewed 3222 times
The idea being if screwed loosely the track has aability to move for expansion etc. Can also be tightened down for areas where the track needs to stay in place such as next to station platforms.

The coloured ones are simple to give the 4 station platforms a colour each for future use with the remote control system
IMG_20230610_104238_178.jpg
IMG_20230610_104238_178.jpg (2.37 MiB) Viewed 3222 times
Computer Controlled Garden Railway.
Previously N & OO Gauge Indoors.

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests