How to adjust servo throws on a Deltang Rx102 receiver
How to adjust servo throws on a Deltang Rx102 receiver
Following a couple of enquiries recently about how the servo outputs from the Deltang Rx102 can be adjusted, I've put together a short video. Hopefully some might find it useful.
Rik
Rik
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: How to adjust servo throws on a Deltang Rx102 receiver
I certainly will Rik so thanks for posting.
Re: How to adjust servo throws on a Deltang Rx102 receiver
Glad it's been useful. It's one of those things that looks quite daunting when written down but is fairly straightforward when demonstrated. So saying, I've now written a blog post to go with it which hopefully makes sense once you've watched the video.
http://riksrailway.blogspot.com/2018/01 ... rx102.html
Rik
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: How to adjust servo throws on a Deltang Rx102 receiver
I have never bothered to adjust servos using the Deltang and compensated mechanically but you have demonstrated that it can easily be done.
Re: How to adjust servo throws on a Deltang Rx102 receiver
Thank you Rik for another brilliant video on how to...when i get around to buying another Deltang receiver I will certainly watch this video again.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: How to adjust servo throws on a Deltang Rx102 receiver
Thank you Rick.
I donβt know what we would do without your videos!
Just changed my Roundhouse Billy to 2.4 gig with your help and plan to change other 40meg locos to use the one transmitter TX24.
David
I donβt know what we would do without your videos!
Just changed my Roundhouse Billy to 2.4 gig with your help and plan to change other 40meg locos to use the one transmitter TX24.
David
Re: How to adjust servo throws on a Deltang Rx102 receiver
Thanks chaps. Nice to hear you find my videographic mutterings helpful. Much easier sometimes to demonstrate than trying to explain in text.
Rik
Rik
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Who is online
Users browsing this forum: No registered users and 8 guests