Garden Railway Forum

A real loss to our hobby. Excellent service and products. Hope someone can and does keep there range going!

I used to use DecaDry rub down transfers. Quite a variety of fonts, sizes etc. Find it difficult to source them these days though.

I have track fixed down to a wood base with steel panel pins. Most of it has been down about 15 years with no major problems.

MSS rolling stock is easily modified to couple to standard 16 mm rolling stock. Dream Steam also supply a buffer beam fitted with a standard buffer/coupler to fit MSS stock with minimum modification.
Hope this helps.

Dream Steam have limited stocks of the MSS tender in kit form for about £43.

Hi Jim,
Just a thought, if you can't get a Cheddar Models tender could you adapt a MSS/Mamod tender? I think they go for about £45.

Hi Cheshire.
In my experience, I would recommend an Essel engineering chassis or a Roger Hine chassis. I have loco's built by both of these and they are well made, powerfull, and durable. Hope this helps.
Alan.

Hopefully this photo will be the right way up!

Little John, starting to earn his keep!

Hi Jim, somewhere in my back issues of 16mm today there is an article on how to use/reconfigure the Y points as normal L/R points. When I get a moment I'll see if I can find it.

I have a large shed 17x10 but only have use of about half of it as the other half is allocated to domestic use and a workbench. In my old house I had a 8x6 shed and the railway was a bit of a tail chaser! Two more sections to build and lay track on and I'll have a complete circuit. Like your railway...

Hi Steamie1
Very pleased with Little John. Very well made!

Don't know what happened to image thought it did'nt need rotating!

A bit more progress in the shed! Unfortunately still hav'nt completed the circuit though!

Thank you everyone for your help and advice, it's much appreciated. I've charged the loco using the Axtronics charger and it charged fine. I think roundhouse supply a different charger to the one shown in the manual.

Many thanks for your help, i just wanted to make sure and not damage the loco. I'll have to be more organized in the future!

Hi Tom Tom,
It's a Axtronics Smart Charger model No H01440005-XX-D1. I'm wondering if they have upgraded the charger and not the manual.

Hav'nt run my Little John loco for a while, gone to charge it up this morning and like a fool I've mixed the charger up with some others, think I've found it but it dos'nt bear any resemblance to the one in the instructions. Anyone know if the charger supplied is different to one illustrated?

Oops forgot to rotate image!

At last I've made some progress on my shed railway! Hoping to have a complete circuit before year end!