Garden Railway Forum

LGB, Roundhouse and Accucraft have widen their models to enable 45mm so on 32mm they look not right.

The saddle tank is not from an LGB Rusty. Its made out of sheets.

The kit is badly assembled. Glue cant bridge the gaps and the parts dont line up. Hence smokebox and cab came apart for the chassis/frame. The Toytrain block is worn out. So the loco will be stored in the loft.

I cant check as its still in the mail......bought S/H

It definitely has an LGB Toytrain motorblock.

Anyone recognize this loco? LGB Toytrain motorblock. Could it be a GRS kit?

Fine sand didnt work for me, the sand prohibits bending.

Try bending around a tube or round stock material, 20mm round bar will give a radius about 10mm

IDE is very old 10-15 years last build

Sata 1-2-3- refers only to the data transferspeed. Pinlayout and cables are the same and the drives are downwards compatible so no problems here!

7€ for the enclosure and 4.60€ cable.

and a dual power USB cable (the red connector is power only) power from 2 USB ports to the drive, to be sure enough power is available as i got the message "USB drive not ready"

I just opened a parcel just moments ago which contains a hard drive enclosure.... The drive isnt recognized by my laptop, it just makes clicking noise, plugged in the desktop and its readable.

Should there be more glasses in the outside corner or further apart and less in the inside, oil instead of water etc,etc. https://www.youtube.com/watch?v=deqsJ8dW-6Y https://www.youtube.com/watch?v=mfNEzpjY2Ho both show all the problems they encountert, in GERMAN only but a MOTION picture says more ...

There is a lot more to it, water evaporates, speed in the corners, inside corner shorter dan outside etc.etc.

I found this software for programming Deltang Receivers on Windows 10

https://modellbahnblog.de/software-zum- ... pfaengern/

Language can be set to English during setup.


Works with Prog4

Haven't thried it yet!!

Can be found on his Blog!

A,B are 4 and 5.

X and y can both rotate which makes it a real 3D machine. X,Y and Z is called an 2.5D

Search on Youtube for "Hermle 5 axis"

Ive used rolled metal sheet. Afterwards the sheet needs to be trimmed as the first few mm are "flat" due to the nature of the rolling machine. Soldered lugs on the oposite sides for holding with screw. maybe the best method is to glue the roof to the body and make this detachable from the ...

Very interesting post!

new year 2020!

Roundhouse has 2 and 3 axle chassis (without jackshaft) as kits. Diesel Chassis Kit - HBKD2 and HBKD3

Roundhouse NDM-6 weighs 3.5kg and powered by 2 motors.

I replaced my Weiss 210 lathe three months ago with an Optimum 2807V. Its taken me a lot of effort to sort the problems with this lathe. WHY? Optimum sells through dealerships which get their machines from a local or regional importer which gets them from Germany or possibly direct from China. I can...