Peterborough shopping list & valve chest covers.

River Lin · Post by **River Lin** » Sun Mar 29, 2015 8:59 pm

Greetings all.
Does anyone know:
1. who stocks opening spectacles for the cab of my Lady Ann. I looked at these at last years show but kept my wallet in my pocket.

2. who makes running boards for the above loco. My aging Lady needs to cover up a little as she is starting to feel the cold

Also, I asked a few months back if anyone on this esteemed forum had any of the black cylinder covers for my Lady with the older rectangular valve chests as Roundhouse have absolutely none in stock any more. If anyone has come across any in old boxes or drawers etc. that are feeling unloved and would like a new home please let me know what you would like for them.
Regards.
David

MDLR · Post by **MDLR** » Sun Mar 29, 2015 9:11 pm

Let Locoworks be your friend......................

http://www.locoworks.co.uk/locoworks-de ... -lady-anne

River Lin · Post by **River Lin** » Sun Mar 29, 2015 10:27 pm

Thanks Brian.
My bank balence is getting twitchy already.
D.

Big Jim · Post by **Big Jim** » Sun Mar 29, 2015 11:04 pm

Also, I asked a few months back if anyone on this esteemed forum had any of the black cylinder covers for my Lady with the older rectangular valve chests as Roundhouse have absolutely none in stock any more. If anyone has come across any in old boxes or drawers etc. that are feeling unloved and would like a new home please let me know what you would like for them.

These are like rocking horse droppings!

If more than one person offers you a set, pass their details on to me please!

TonyW · Post by **TonyW** » Sun Mar 29, 2015 11:17 pm

River Lin:109610 wrote:Also, I asked a few months back if anyone on this esteemed forum had any of the black cylinder covers for my Lady with the older rectangular valve chests as Roundhouse have absolutely none in stock any more.

The current covers fit the older cylinders if you replace the cheesehead 8BA x 1/2inch screws with countersunk heads and countersink the holes in the valve chest cover. You'll probably also need to file a slot in the front of the cover to fit over the dummy valve spindle on the valve chest. Works well, I've fitted them to several locos this way, including this one: http://www.rhoshelyg.me.uk/Pictures/DSC03799.JPG

River Lin · Post by **River Lin** » Mon Mar 30, 2015 9:51 am

Hi Tony.
Sounds a good modification but as my valve chests are rectangular does the new cover completely cover the top of the chest. Also if I change the screws to countersink, do I need shorter ones?
Thanks again for your help.
D.

River Lin · Post by **River Lin** » Mon Mar 30, 2015 9:53 am

Will do Jim.
D.

TonyW · Post by **TonyW** » Mon Mar 30, 2015 10:38 am

River Lin:109626 wrote:Sounds a good modification but as my valve chests are rectangular does the new cover completely cover the top of the chest.

Yes, as shown in the picture I linked to.

River Lin:109626 wrote:Also if I change the screws to countersink, do I need shorter ones?

You may need to remove one or two threads from the end of each screw to stop them bottoming in their holes. If they do hit the bottom of the hole there is a real risk they won't hold the valve chest steam tight and over-tightening will snap the screw.

bazzer42 · Post by **bazzer42** » Mon Mar 30, 2015 1:22 pm

I've been thinking of tarting my old Lady up (no offence Mrs Broom) and wonder now whether I could drill the covers to allow the heads through. I have got a set of covers on my Katy so I can see they will fit with either drilling or new screws.

River Lin · Post by **River Lin** » Mon Mar 30, 2015 5:29 pm

Thanks Tony. I may have to try it ifi can make it look anything like yours.

Roll on P'borough.
D.

Garden Railway Forum

Peterborough shopping list & valve chest covers.

Peterborough shopping list & valve chest covers.

Re: Peterborough shopping list & valve chest covers.

Who is online