Page 2 of 2

Re: Stawberry Valley Light Railway

Posted: Mon Jul 20, 2026 6:54 pm
by nlc1072
Couple of new additions to the roster, a Roundhouse Russell ran lightly bought for £400.00 because it ran really poorly, only the boiler was full of limescale and derailed everywhere, on closer inspection at home the front and rear pony wheels were installed in the wrong ends - resulting in derailments at every minor track imperfection. Ten minute fix and runs like any roundhouse loco should. An overnight limescale flush is next on the agenda for that. Coaches a purchase from eBay for £25.00 each, there are two more coaches of the typical Bachmann big haulers style in the same livery included in a job lot for £100 - all going cheap because one axle was snapped, but still present and included.... 5 minutes of no more nails and it runs wonderfully.

I also have a few more bits from where I got the Russell, I'll post those later.

Tomorrow it is back to laying the track bed and Wednesday I'll go to the builders merchants and buy £20 more of bricks... (that's all I can fit in a saloon car boot).

I appreciate the lining and ballasting tips, I will source some edging to go with the track bed Wednesday.

If anybody recognises the coaches let me know i.e. where they came from or what kit they're built from or even who owned them last, I wouldn't mind some more.


Re: Stawberry Valley Light Railway

Posted: Tue Jul 21, 2026 7:04 am
by gilfachphil
Looks great, you got a bargain there,

Phil

Re: Stawberry Valley Light Railway

Posted: Tue Jul 21, 2026 8:31 am
by ge_rik
gilfachphil wrote: Tue Jul 21, 2026 7:04 am Looks great, you got a bargain there,
Phil
My thinking on both counts.
Can't identify the coaches. Are they ply or plastic?

Rik

Re: Stawberry Valley Light Railway

Posted: Tue Jul 21, 2026 10:16 am
by nlc1072
ge_rik wrote: Tue Jul 21, 2026 8:31 am
gilfachphil wrote: Tue Jul 21, 2026 7:04 am Looks great, you got a bargain there,
Phil
My thinking on both counts.
Can't identify the coaches. Are they ply or plastic?

Rik
It appears to be laser cut ply. Here's some more photos.
17846253540737613127685745910761.jpg
17846253540737613127685745910761.jpg (5.93 MiB) Viewed 45 times
1784625373285814839056532130663.jpg
1784625373285814839056532130663.jpg (5.67 MiB) Viewed 45 times
17846253892726863337750330736902.jpg
17846253892726863337750330736902.jpg (4.15 MiB) Viewed 45 times

Re: Stawberry Valley Light Railway

Posted: Tue Jul 21, 2026 5:20 pm
by nlc1072
So I managed to get some more bricks today, and will pick up some more tomorrow...

I found a spot for a small station to be placed whilst I was laying the track back. I now have a siding where a station will be.

I put the bricks in where I will place a tunnel, It will be covered in clay from a small pond I am going to build. It will also have a small stream/waterfall running over it.

The paving slabs are for a shed the railway will run through in the corner of the garden.

Here is some more progress pictures.
WhatsApp Image 2026-07-21 at 17.14.51.jpeg
WhatsApp Image 2026-07-21 at 17.14.51.jpeg (412.93 KiB) Viewed 12 times
WhatsApp Image 2026-07-21 at 17.15.17.jpeg
WhatsApp Image 2026-07-21 at 17.15.17.jpeg (396.14 KiB) Viewed 12 times
WhatsApp Image 2026-07-21 at 17.15.171.jpeg
WhatsApp Image 2026-07-21 at 17.15.171.jpeg (373 KiB) Viewed 12 times