Adhesive for concrete church model
- andymctractor
- Trainee Driver
- Posts: 705
- Joined: Fri Feb 01, 2013 12:03 am
- Location: Suffolk, UK
- Contact:
Adhesive for concrete church model
I've had a 16mm/ft concrete Cain Howley church for several years. I'm now getting to the point where I might actually put it together. I have several buttresses and battlements and other concrete additions. What I can't remember is what advice there is in the way of adhesive to use. I'm thinking external tile adhesive but I'm hoping someone has put one of these together with success. I have a large external floor tile that the church will be fixed to. The finished article will have to remain out in all weathers and will probably be painted with masonry paint.
Any positive or negative experiences out there?
Any positive or negative experiences out there?
Regards
Andy McMahon
If it moves, salute it. If it doesn't move, paint it. (RN sailors basic skills course 1968)
Andy McMahon
If it moves, salute it. If it doesn't move, paint it. (RN sailors basic skills course 1968)
- Peter Butler
- Driver
- Posts: 5266
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Adhesive for concrete church model
Hi Andy,
as you know, Cain is local to me and one of our group members. I have his Engine Shed which I put together myself some years ago now, if I recall correctly it is held together with waterproof tile cement (powder mixed with SBR) and has not moved in at least 5 years, probably longer.
An extra helping spread inside at the corners will add strength too.
It stays outdoors all year round as it is too heavy to move. One alteration to the original was to fit a slate effect roof, instead of the cast corrugated one, which prevents water from collecting at the top of the walls and penetrating down between the joints......
as you know, Cain is local to me and one of our group members. I have his Engine Shed which I put together myself some years ago now, if I recall correctly it is held together with waterproof tile cement (powder mixed with SBR) and has not moved in at least 5 years, probably longer.
An extra helping spread inside at the corners will add strength too.
It stays outdoors all year round as it is too heavy to move. One alteration to the original was to fit a slate effect roof, instead of the cast corrugated one, which prevents water from collecting at the top of the walls and penetrating down between the joints......
The best things in life are free.... so why am I doing this?
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
- andymctractor
- Trainee Driver
- Posts: 705
- Joined: Fri Feb 01, 2013 12:03 am
- Location: Suffolk, UK
- Contact:
Re: Adhesive for concrete church model
Thanks for the advice. I've just bought some SBR to ballast my track so I'm half way there.Peter Butler wrote: ↑Wed Apr 15, 2020 2:01 pm Hi Andy,
as you know, Cain is local to me and one of our group members. I have his Engine Shed which I put together myself some years ago now, if I recall correctly it is held together with waterproof tile cement (powder mixed with SBR) and has not moved in at least 5 years, probably longer.
An extra helping spread inside at the corners will add strength too.
It stays outdoors all year round as it is too heavy to move. One alteration to the original was to fit a slate effect roof, instead of the cast corrugated one, which prevents water from collecting at the top of the walls and penetrating down between the joints......
IMG_2974.JPG
I've also realised this part of the forum is for forum questions and this should be discussed in the Help and Advice section.
Apologies to the admin.
Regards
Andy McMahon
If it moves, salute it. If it doesn't move, paint it. (RN sailors basic skills course 1968)
Andy McMahon
If it moves, salute it. If it doesn't move, paint it. (RN sailors basic skills course 1968)
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Adhesive for concrete church model
I realise this is a slight thread drift, but having just "googled" SBR, i see it is a waterproof additive, would this also be suitable for concert, when used in conjunction with a water feature - sorry for the drift
- andymctractor
- Trainee Driver
- Posts: 705
- Joined: Fri Feb 01, 2013 12:03 am
- Location: Suffolk, UK
- Contact:
Re: Adhesive for concrete church model
I'm not a builder but I would imagine it would be suitable.
I'm going to use it for ballasting granite chippings to my track which is on a solid brick base. I have a short piece of track that I have ballasted onto a brick and left it in the garden for several years now and I would need to a cold chisel to remove the track and ballast from the brick.
Not everyone is in favour of using SBR for this purpose.
Regards
Andy McMahon
If it moves, salute it. If it doesn't move, paint it. (RN sailors basic skills course 1968)
Andy McMahon
If it moves, salute it. If it doesn't move, paint it. (RN sailors basic skills course 1968)
Re: Adhesive for concrete church model
Andy, many thanks, I am of the free flow ballast, however each to their methods, if your happy with it it is all that matters.andymctractor wrote: ↑Thu Apr 16, 2020 5:33 pmI'm not a builder but I would imagine it would be suitable.
I'm going to use it for ballasting granite chippings to my track which is on a solid brick base. I have a short piece of track that I have ballasted onto a brick and left it in the garden for several years now and I would need to a cold chisel to remove the track and ballast from the brick.
Not everyone is in favour of using SBR for this purpose.
Who is online
Users browsing this forum: No registered users and 1 guest