The Charlwood Light Railway (CWLR)
Re: The Charlwood Light Railway (CWLR)
Great photos and videos Rob of your line. Thats how we would like ours to look like....
My Mum had a Cocker Spaniel before Mum passed away. She said "Cocker Spaniels were her favourite dog" next to... Lancashire Heelers of course....
My Mum had a Cocker Spaniel before Mum passed away. She said "Cocker Spaniels were her favourite dog" next to... Lancashire Heelers of course....
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
I know! Believe me, if you meet her, you’ll never forget her
Thanks Rod, it’s been a most enjoyable weekend!
Cute! Got to admit, not a dog I’m overly familiar with, but very sweet
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
A few days ago I said that I needed some more carriages. I’m planning on adding a couple of Swift16 bogie Carr’s to the roster later in the year, but two distinct trains would be nice for busy days.
So, I picked up a couple of these from my local garden railway supplier, with the intention of anglicising them a bit. Don’t worry, I’m not ‘going American’...
Current plan is a full repaint, chopper couplers and Vac bags, torpedo vents on the roof, duckets and new hand rails.
Essentially the idea is that No. 3 was built by Baldwin for an Australian line, that closed before it could be delivered. The CLR’s General Manager at the time heard about this and, having been impressed by the Baldwins and Alcos used during his time on the front in WW1, decided the railway had to have it. At the same time, another manufacturer, this time in the UK, was building American style carriages for said Australian line, and these were also acquired.
No. 3 was very successful, leading to No. 4 being built at the railway’s own workshops under license (with a much more anglicised look). The carriages however were the only ones built.
So, I picked up a couple of these from my local garden railway supplier, with the intention of anglicising them a bit. Don’t worry, I’m not ‘going American’...
Current plan is a full repaint, chopper couplers and Vac bags, torpedo vents on the roof, duckets and new hand rails.
Essentially the idea is that No. 3 was built by Baldwin for an Australian line, that closed before it could be delivered. The CLR’s General Manager at the time heard about this and, having been impressed by the Baldwins and Alcos used during his time on the front in WW1, decided the railway had to have it. At the same time, another manufacturer, this time in the UK, was building American style carriages for said Australian line, and these were also acquired.
No. 3 was very successful, leading to No. 4 being built at the railway’s own workshops under license (with a much more anglicised look). The carriages however were the only ones built.
Re: The Charlwood Light Railway (CWLR)
No idea why I've missed over a week's worth of updates to this thread. Really enjoyed the videos - I do enjoy slow running and shunting operations.
You can sometimes resurrect failed lipos by putting them on a nicd trickle charge cycle for a few minutes to bring them to a safe level for the normal lipo charger to recognise them. HOWEVER, iit's not guaranteed to work and you must monitor the charging very carefully. Ironic, isn't it that it was the battery monitor that drained them. Would be worth fitting battery protection boards to prevent them over discharging.
Rik
You can sometimes resurrect failed lipos by putting them on a nicd trickle charge cycle for a few minutes to bring them to a safe level for the normal lipo charger to recognise them. HOWEVER, iit's not guaranteed to work and you must monitor the charging very carefully. Ironic, isn't it that it was the battery monitor that drained them. Would be worth fitting battery protection boards to prevent them over discharging.
Rik
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
Thanks Rik, I can’t be doing with locos flying around everywhere. I like things to be at a realistic speed. I’m the same in OO and 009 too, so poor running locos are a major annoyance.ge_rik wrote: ↑Wed May 01, 2019 1:06 pm No idea why I've missed over a week's worth of updates to this thread. Really enjoyed the videos - I do enjoy slow running and shunting operations.
You can sometimes resurrect failed lipos by putting them on a nicd trickle charge cycle for a few minutes to bring them to a safe level for the normal lipo charger to recognise them. HOWEVER, iit's not guaranteed to work and you must monitor the charging very carefully. Ironic, isn't it that it was the battery monitor that drained them. Would be worth fitting battery protection boards to prevent them over discharging.
Rik
That’s a handy tip re. li-Po batteries, thanks!
I’ve just discovered some vintage footage of the CLR, believed to have been taken by a local photographer in the 1930s....
In reality, I stuck my iPhone through the cab doors of No.3 and pressed record.....
Oh, and look out for Wilma about half way round...
Re: The Charlwood Light Railway (CWLR)
Enjoyed that! Clearances are quite tignt in a couple of places, had to hold my breath. That 25mph speed limit sign is quite appopriate - but only on the fast section.
Rik
Rik
Re: The Charlwood Light Railway (CWLR)
Lovely video, lovely line, lovely dog!
I agree about your speed as well, thats the way it should be.
I agree about your speed as well, thats the way it should be.
Philip
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
Re: The Charlwood Light Railway (CWLR)
I couldn't agree more - especially about Wilma!
Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"
"'cause I can't manage on three gaffer!"
- Peter Butler
- Driver
- Posts: 5244
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: The Charlwood Light Railway (CWLR)
Wilma seems to have stolen the show, she has certainly found a place in my heart.
The best things in life are free.... so why am I doing this?
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
Thanks Everyone.Peter Butler wrote: ↑Fri May 03, 2019 9:15 pm Wilma seems to have stolen the show, she has certainly found a place in my heart.
She has that effect everywhere she goes Peter, people just fall in love with her! They don’t live with her though...
Re: The Charlwood Light Railway (CWLR)
Great video, I must try that sometime... Very convincing too, with the exception of Wilma's cameo, which made me laugh out loud...
I hadn't worked out the layout of line until I watched the video - it seems like a good way to combine realistic running with a good long run, without taking up too much garden...
Have fun with the new carriages, I look forward to seeing the results. It doesn't get any use nowadays, but I still have a sort of Corris-style bash of one of those - minus balconies and with the ends turned round to form a centre vestibule...
Cheers,
Andrew.
I hadn't worked out the layout of line until I watched the video - it seems like a good way to combine realistic running with a good long run, without taking up too much garden...
Have fun with the new carriages, I look forward to seeing the results. It doesn't get any use nowadays, but I still have a sort of Corris-style bash of one of those - minus balconies and with the ends turned round to form a centre vestibule...
Cheers,
Andrew.
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
Things have been a bit quiet at the CLR recently. Mostly due to the ridiculously wet June we’ve had but work and holidays also keep getting in the way.
Last week I finally decided to crack on with replacing the last problematic R1 point with an R3. This is one end of the loop at Top-End. With a bit of juggling I’ve managed to make it fit without having to cut anything off the R3 point and curve to maintain spacings. It’s not perfect, but then it is a light railway. I’ll do a fair bit of testing before I ballast it to make it easier to fettle. Can’t see it being a major issue though.
Brass checkrail extensions are on order from Bertram Heyn which will ensure that anything with finescale flanges (I.e. Lady May and the Baguley) will run through without derailing. I used his R1 version for the last few years and they really do make a massive difference.
I’ve also started work on one of the two Bachman’s coaches I purchased. Nothing major is going to be done, just some detailing work and toning down of the Americanisms. To that end I’ve made a start making some new balcony railings;
I’ve also fitted Swift16 chopper couplings. Not Cheap, but certainly worth it.
Since that picture was taken I’ve added a few more bits (roof ventilators and hand rails) and I’ve started repainting the bodywork.
More photos to follow, these were just what I had on my phone whilst I’m sitting in a siding for a few hours in work!
Last week I finally decided to crack on with replacing the last problematic R1 point with an R3. This is one end of the loop at Top-End. With a bit of juggling I’ve managed to make it fit without having to cut anything off the R3 point and curve to maintain spacings. It’s not perfect, but then it is a light railway. I’ll do a fair bit of testing before I ballast it to make it easier to fettle. Can’t see it being a major issue though.
Brass checkrail extensions are on order from Bertram Heyn which will ensure that anything with finescale flanges (I.e. Lady May and the Baguley) will run through without derailing. I used his R1 version for the last few years and they really do make a massive difference.
I’ve also started work on one of the two Bachman’s coaches I purchased. Nothing major is going to be done, just some detailing work and toning down of the Americanisms. To that end I’ve made a start making some new balcony railings;
I’ve also fitted Swift16 chopper couplings. Not Cheap, but certainly worth it.
Since that picture was taken I’ve added a few more bits (roof ventilators and hand rails) and I’ve started repainting the bodywork.
More photos to follow, these were just what I had on my phone whilst I’m sitting in a siding for a few hours in work!
Re: The Charlwood Light Railway (CWLR)
Sounds interesting. Have you more info?RobRossington wrote: ↑Tue Jun 25, 2019 11:20 am Brass checkrail extensions are on order from Bertram Heyn which will ensure that anything with finescale flanges (I.e. Lady May and the Baguley) will run through without derailing. I used his R1 version for the last few years and they really do make a massive difference.
Rik
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
Hi Rik,ge_rik wrote: ↑Tue Jun 25, 2019 12:21 pmSounds interesting. Have you more info?RobRossington wrote: ↑Tue Jun 25, 2019 11:20 am Brass checkrail extensions are on order from Bertram Heyn which will ensure that anything with finescale flanges (I.e. Lady May and the Baguley) will run through without derailing. I used his R1 version for the last few years and they really do make a massive difference.
Rik
If you’ve been to the Llanfair Garden railway show you’ll have probably seen Bertram and his funky hat. He owns Modellbau-Werkstatt Heyn and produces all Sorts of accessories like point levers and sleepers. In fact, thinking about it I’m sure I’ve seen some of his point levers on your videos?
Anyway, if you delve into his accessories section you’ll find these https://modell-werkstatt.de/completment ... s-radius-1 for R1 points and these https://modell-werkstatt.de/completemen ... s-radius-3 for R3.
They sit inside the existing check rail, lengthening, raising and thickening it. I found all of my running issues disappeared immediately. You can see two of them in this photo;
It’s worth noting, that coarse scale LGB wheels will still run through without any issues. Well worth it if you’re running live steam etc. No connection, just a happy customer etc.
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: The Charlwood Light Railway (CWLR)
Surely you can make these yourself, even Plastikard could be used?
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
Yes, no doubt about it. But I’m lazy.tom_tom_go wrote: ↑Tue Jun 25, 2019 6:25 pm Surely you can make these yourself, even Plastikard could be used?
Re: The Charlwood Light Railway (CWLR)
Very interesting. Yes, I've bought stuff from Bertram at Llanfair but not seen these. I certainly have a need for a couple. Do the slots coincide with the sleepers? I might try making one from brass shim.
Rik
Rik
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
They do indeed Rik, although to be more specific they coincide with the chairs.
The little brass prongs bend and press against the bottom of the rail web. No need for gluing.
Is it R1 ones you need? If so I have a few going spare!
Re: The Charlwood Light Railway (CWLR)
Hi RobRobRossington wrote: ↑Tue Jun 25, 2019 7:26 pmThey do indeed Rik, although to be more specific they coincide with the chairs.
The little brass prongs bend and press against the bottom of the rail web. No need for gluing.
Is it R1 ones you need? If so I have a few going spare!
I was going to say 'No' as the main problem I have is with two R3s, but I then remembered a couple of R1s which occasionally play up with one particular coach bogie. So, yes please, if you can spare a couple for R1s, I'd be grateful. I'll PM you my address.
Thanks
Rik
- RobRossington
- Trainee Fireman
- Posts: 168
- Joined: Sun Jan 30, 2011 9:57 pm
- Location: Liverpool
Re: The Charlwood Light Railway (CWLR)
ge_rik wrote: ↑Wed Jun 26, 2019 6:00 amHi RobRobRossington wrote: ↑Tue Jun 25, 2019 7:26 pmThey do indeed Rik, although to be more specific they coincide with the chairs.
The little brass prongs bend and press against the bottom of the rail web. No need for gluing.
Is it R1 ones you need? If so I have a few going spare!
I was going to say 'No' as the main problem I have is with two R3s, but I then remembered a couple of R1s which occasionally play up with one particular coach bogie. So, yes please, if you can spare a couple for R1s, I'd be grateful. I'll PM you my address.
Thanks
Rik
A progress update in the Jackson Sharp.
Some of you may recognise the livery. I’ve been using the same scheme in 009 for a few years (I model colonial prototypes), but seeing GTB’s Jackson Sharp’s made me decide to use it in 16mm too.
They’ll probably never be finished, being the type of thing that I’ll enjoy tinkering with endlessly, but it can at least now be put back together. I’ll probably repaint the roof at some point as I’m not 100% happy with it.
Who is online
Users browsing this forum: No registered users and 22 guests