My Winter Project - 2 Car Multiple Unit
- RylstonLight
- Trainee Fireman
- Posts: 209
- Joined: Fri Oct 26, 2012 3:10 pm
- Location: Pontefract West Yorkshire
Re: My Winter Project - 2 Car Multiple Unit
The livery is rather nice under natural light. I was wondering about what the battery compartments were for but now I know. Very elegent solution to hiding them. What is it about railcars/railbuses that are so appealing despite there not beeing a huge number of examples of prototypes?
Andy S. at the Rylston Light Railway
-
- Trainee Fireman
- Posts: 210
- Joined: Mon Feb 01, 2016 6:58 pm
- Location: Devon
Re: My Winter Project - 2 Car Multiple Unit
Yes, it's the endless problem of hiding dozens of batteries in our small locos! I'm waiting with hope for someone to invent a tiny battery with an enormous Ah capacity!RylstonLight wrote: ↑Sun Dec 17, 2017 5:57 pm The livery is rather nice under natural light. I was wondering about what the battery compartments were for but now I know. Very elegent solution to hiding them. What is it about railcars/railbuses that are so appealing despite there not beeing a huge number of examples of prototypes?
I think that if the bulk of narrow gauge lines had survived commercially into the 60s and 70s then they would almost certainly have employed multiple units. We are also used to seeing them on the mainline so maybe we all let our imaginations run away and we create quirky "might have been" models. Personally, I was thinking that my line would have built one for moving passengers if had existed for real!
Artistic licence! - I embrace it on my railway as much as possible!
Garden railways don't run on steam or electric rather wine and Jedi master level patience
- steamer68
- Trainee Fireman
- Posts: 208
- Joined: Tue Nov 28, 2017 11:33 am
- Location: Bishop Auckland, UK
Re: My Winter Project - 2 Car Multiple Unit
Hi James I love the colour of your railcar it looks great on your line and you have done a great job in the battery compartment, I'm sure through time small and more powerful batteries will be available.
Regards
Kevin
Kevin
Re: My Winter Project - 2 Car Multiple Unit
10mm scaleJames from Devon wrote: ↑Sun Dec 17, 2017 5:18 pmThanks and I love your railcar....what gauge is it?
Re: My Winter Project - 2 Car Multiple Unit
Great work as ever! Loving the bus - very 1970's BR - The neatness of your wiring puts mine to shame
Where did I put that uncoupler?
Re: My Winter Project - 2 Car Multiple Unit
Splendid.
I think you are right about the introduction of railcars on various ng lines. It never happened in the UK but it could have done.
I think you are right about the introduction of railcars on various ng lines. It never happened in the UK but it could have done.
If at first you don't succeed, use a bigger hammer!
-
- Trainee Fireman
- Posts: 210
- Joined: Mon Feb 01, 2016 6:58 pm
- Location: Devon
Re: My Winter Project - 2 Car Multiple Unit
Happy New Year Chaps!
I managed to fit in a couple of days in the workshop over the Xmas break so I have a little update.
Hope you like it. Loads more to finish but it is definitely getting there.
I have got the trailing car made up now, I haven't included lots of pictures of the construction as its essentially the same as the leading car!
The roof sections have been bothering me for a while, I was kind of dreading them. I don't like plasticard really, it seems to distort in heat and this roof needed to be removable. I did consider making one from resin but the amount of silicone needed would have been really expensive for just 2. I tried out a new method and I am quite happy with the results. I like the roof to have a little texture as they would have in the real world:
Masking tape, sticky side up:
I then stuck 24 sections of Mahogany stripwood (3mm x 5mm) to the tape using black lines on my bench to keep it square:
Next step is to cover the model with masking tape and drape the roof over the model, in the correct place:
Then I coat the wood strips in casting resin which gets sucked into the gaps in the wood strips which then hardens, keeping the roof in its shape:
Once left overnight to cure, the roof can be removed and the making tape peeled off and then I use a palm sander to remove the excess resin and make the ends square which leaves a smooth roof in the exact radius to match the model:
Another pair of bogies, one with lateral bolsters and one without:
Then came the best part.... a run in the garden between showers, first time with both cars together. Really happy that all worked well:
Back to the bench for the rest of the paintwork, wiring, lighting, detail work and interiors!
Thanks for all the lovely comments so far, very much appreciated.
Cheers
Jim
I managed to fit in a couple of days in the workshop over the Xmas break so I have a little update.
Hope you like it. Loads more to finish but it is definitely getting there.
I have got the trailing car made up now, I haven't included lots of pictures of the construction as its essentially the same as the leading car!
The roof sections have been bothering me for a while, I was kind of dreading them. I don't like plasticard really, it seems to distort in heat and this roof needed to be removable. I did consider making one from resin but the amount of silicone needed would have been really expensive for just 2. I tried out a new method and I am quite happy with the results. I like the roof to have a little texture as they would have in the real world:
Masking tape, sticky side up:
I then stuck 24 sections of Mahogany stripwood (3mm x 5mm) to the tape using black lines on my bench to keep it square:
Next step is to cover the model with masking tape and drape the roof over the model, in the correct place:
Then I coat the wood strips in casting resin which gets sucked into the gaps in the wood strips which then hardens, keeping the roof in its shape:
Once left overnight to cure, the roof can be removed and the making tape peeled off and then I use a palm sander to remove the excess resin and make the ends square which leaves a smooth roof in the exact radius to match the model:
Another pair of bogies, one with lateral bolsters and one without:
Then came the best part.... a run in the garden between showers, first time with both cars together. Really happy that all worked well:
Back to the bench for the rest of the paintwork, wiring, lighting, detail work and interiors!
Thanks for all the lovely comments so far, very much appreciated.
Cheers
Jim
Garden railways don't run on steam or electric rather wine and Jedi master level patience
Re: My Winter Project - 2 Car Multiple Unit
Have some more lovely comments - That really does look nice, love the colour.
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
Re: My Winter Project - 2 Car Multiple Unit
Hi Jim,
They look absolutely outstanding, the livery really sets them off. The view of them in the bay platform is really superb.
All the best,
Andrew
They look absolutely outstanding, the livery really sets them off. The view of them in the bay platform is really superb.
All the best,
Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"
"'cause I can't manage on three gaffer!"
- IrishPeter
- Driver
- Posts: 1400
- Joined: Wed Feb 23, 2011 3:24 am
- Location: 'Boro, VA
Re: My Winter Project - 2 Car Multiple Unit
I rather like those. Another cracking job!
Cheers,
Peter in VA
Cheers,
Peter in VA
Traffic Pattern? What pattern? Spuds out; grain in, but cattle, sheep and passengers are a lot less predictable.
Re: My Winter Project - 2 Car Multiple Unit
Hi Jim.
What a fantastic method of fabricating a roof. Looks fabulous. Like I usually do, you want it removable. How is it held on. Mine have a thin frame glued to them that just fits inside the coach sides.
I might try this fabricating method with my next model if that's ok.
D.
What a fantastic method of fabricating a roof. Looks fabulous. Like I usually do, you want it removable. How is it held on. Mine have a thin frame glued to them that just fits inside the coach sides.
I might try this fabricating method with my next model if that's ok.
D.
David T.
- Peter Butler
- Driver
- Posts: 5245
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: My Winter Project - 2 Car Multiple Unit
A real work of art Jim and such a clever idea of making a rigid roof. They look wonderful.
The best things in life are free.... so why am I doing this?
Re: My Winter Project - 2 Car Multiple Unit
Very nice, I love the removeable roof, not a technique I've ever seen anyone else use before but the end result looks great.
"What the hell is that?"
"It's a model icebreaker sir."
"It's a bit big isn't it?"
"It's a full scale model sir....."
"It's a model icebreaker sir."
"It's a bit big isn't it?"
"It's a full scale model sir....."
-
- Trainee Fireman
- Posts: 210
- Joined: Mon Feb 01, 2016 6:58 pm
- Location: Devon
Re: My Winter Project - 2 Car Multiple Unit
Hi DavidRiver Lin wrote: ↑Tue Jan 02, 2018 8:09 pm Hi Jim.
What a fantastic method of fabricating a roof. Looks fabulous. Like I usually do, you want it removable. How is it held on. Mine have a thin frame glued to them that just fits inside the coach sides.
I might try this fabricating method with my next model if that's ok.
D.
Of course you can use the roof method, I'd love to see how it works out for you.
On this model the roof is held on with 3 x 2mm screws, 2 into tapped tabs on the back just under the eaves (which will be hidden by equipment) and the other in the exhaust funnel above the cab which screws into a brass strip fitted over the cab roof.
Cheers
J
Garden railways don't run on steam or electric rather wine and Jedi master level patience
-
- Trainee Fireman
- Posts: 210
- Joined: Mon Feb 01, 2016 6:58 pm
- Location: Devon
Re: My Winter Project - 2 Car Multiple Unit
Cheers! , there is, by chance a very nice bridge in the background!
Cheers Peter!IrishPeter wrote: ↑Tue Jan 02, 2018 8:00 pm I rather like those. Another cracking job!
Cheers,
Peter in VA
Thanks Andrew... I built the bay platform with the idea that one day in the future there would be a railcar or two thereSoar Valley Light wrote: ↑Tue Jan 02, 2018 7:52 pm Hi Jim,
They look absolutely outstanding, the livery really sets them off. The view of them in the bay platform is really superb.
All the best,
Andrew
Garden railways don't run on steam or electric rather wine and Jedi master level patience
-
- Trainee Fireman
- Posts: 210
- Joined: Mon Feb 01, 2016 6:58 pm
- Location: Devon
Re: My Winter Project - 2 Car Multiple Unit
Thanks for that. really appreciate your words. I wasn't sure what technique to try, this was also quite quick, hopefully it will stand the test of time
Garden railways don't run on steam or electric rather wine and Jedi master level patience
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: My Winter Project - 2 Car Multiple Unit
Ooooo - I like that method of making the roof - even a dullard like me could manage that
And I also love the bay platform - there is something about platforms like this and having either railcars or pushpin services operating from them - very branch line!
And I also love the bay platform - there is something about platforms like this and having either railcars or pushpin services operating from them - very branch line!
Where did I put that uncoupler?
Re: My Winter Project - 2 Car Multiple Unit
I can only repeat what everyone else has said regarding the roof, and the shot in the bay platform James. All this railcar stuff starts the thought wheels turning.
Grant.
Grant.
Re: My Winter Project - 2 Car Multiple Unit
'fraid its another "Me too". The the whole thing, and the bay shot, just lovely.
Last edited by philipy on Wed Jan 03, 2018 3:34 am, edited 1 time in total.
Philip
Who is online
Users browsing this forum: No registered users and 5 guests