Can you tell what it is yet?
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Progress has been exceptionally slow on this due to my father in law passing away, arranging the funeral, having to clear a house for the mother in law, as well as the garden and garage, that tied with laying 3.2 tonnes of concrete in my own garden and rearranging all the sheds as one needs replacing somewhat urgently. Anyway I digress.
Here it is with a couple of coats of paint, no sandpots, windows or anything yet, but it is very very slowly getting there.
I would point out that it will not be lined as I have no idea how to do it despite owning, but never using a lining pen for the last 10 years, lol.
Here it is with a couple of coats of paint, no sandpots, windows or anything yet, but it is very very slowly getting there.
I would point out that it will not be lined as I have no idea how to do it despite owning, but never using a lining pen for the last 10 years, lol.
- Attachments
-
- IMG_20210502_193804.jpg (1.78 MiB) Viewed 4529 times
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Re: Can you tell what it is yet?
Blimey, Steve. Sounds like you've got an awful lot on your plate!! Please pass on my condolences to your wife and mum in law.
The loco is coming along nicely. In effect, you're building two locos at once, so given everything else, your progress is lvery impressive, especially when you consider this is a scratchbuild.
It's gonna look great when it's done.
Rik
The loco is coming along nicely. In effect, you're building two locos at once, so given everything else, your progress is lvery impressive, especially when you consider this is a scratchbuild.
It's gonna look great when it's done.
Rik
- Peter Butler
- Driver
- Posts: 5243
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Can you tell what it is yet?
A simple way to add lining is to use self adhesive lining tape, which is a continuous strip of coloured plastic, available in various widths on the same backing sheet and in a wide range of colours......
https://i.ebayimg.com/thumbs/images/g/R ... -l225.webp
https://i.ebayimg.com/thumbs/images/g/R ... -l225.webp
Last edited by Peter Butler on Sun May 02, 2021 8:44 pm, edited 1 time in total.
The best things in life are free.... so why am I doing this?
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Loving those brass bands around the boiler, please do tell me more as I would like those on mine if possible.Peter Butler wrote: βSun May 02, 2021 8:41 pm A simple way to add lining is to use self adhesive lining tape, which is a continuous strip of coloured plastic, available in various widths on the same backing sheet and in a wide range of colours......
[attachmehttps://i.ebayimg.com/thumbs/images/g/RBEAAOSww-lfcfS3/s-l225.webpnt=0]IMG_8245.JPG[/attachment]
IMG_8245.JPG
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Quite honestly, that's not even the half it, but thank you for your kind wishes.ge_rik wrote: βSun May 02, 2021 8:38 pm Blimey, Steve. Sounds like you've got an awful lot on your plate!! Please pass on my condolences to your wife and mum in law.
The loco is coming along nicely. In effect, you're building two locos at once, so given everything else, your progress is lvery impressive, especially when you consider this is a scratchbuild.
It's gonna look great when it's done.
Rik
To say I have been busy over the last month just doesn't even come close, I have not printed anything in 2 weeks, what is this world coming to, lol
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- Peter Butler
- Driver
- Posts: 5243
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Can you tell what it is yet?
Boiler bands are self adhesive tape (again!) This time left over from my career days as a picture framer where it was used to enhance mounts.
Try ebay.... picture framing accessories (?) or craft shops.
Try ebay.... picture framing accessories (?) or craft shops.
The best things in life are free.... so why am I doing this?
Re: Can you tell what it is yet?
Yes, I think I can actually tell what it is now!! And a lovely job you are making of it.
You really must do something about lining though. It would be a shame not to after all the hard work, and the lining somehow makes it come alive instead of being just flat.
You really must do something about lining though. It would be a shame not to after all the hard work, and the lining somehow makes it come alive instead of being just flat.
Philip
Re: Can you tell what it is yet?
That is just a fantastic build Steve, one that anyone would be proud to own.
Sorry to hear of your father-in-laws passing, you have my condolences in this sad time for your family.
Sorry to hear of your father-in-laws passing, you have my condolences in this sad time for your family.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Thank you very much, I will be searching shortly for the brass looking onesPeter Butler wrote: βSun May 02, 2021 8:49 pm Boiler bands are self adhesive tape (again!) This time left over from my career days as a picture framer where it was used to enhance mounts.
Try ebay.... picture framing accessories (?) or craft shops.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Do you know, I have just been looking at Peter's and it's amazing what a difference that lining makes. I might bite the bullet and give it a go at some point. just when I thought the end was in sight too, lolphilipy wrote: βMon May 03, 2021 7:26 am Yes, I think I can actually tell what it is now!! And a lovely job you are making of it.
You really must do something about lining though. It would be a shame not to after all the hard work, and the lining somehow makes it come alive instead of being just flat.
All the wiring, batteries, charge point, switch etc is all in place and the chassis has run around the track, so it's just a case of "pretty bits" now.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
I managed a bit of modelling time today between clearing the garden and sorting out a run to the tip.
So no lining yet, still not sure on my skill level there. The rest of the loco is almost there, a few touch up bits to do, sand pot tops and the windows.
I am quite happy with this so far.
So no lining yet, still not sure on my skill level there. The rest of the loco is almost there, a few touch up bits to do, sand pot tops and the windows.
I am quite happy with this so far.
- Attachments
-
- IMG_20210503_170729.jpg (2.52 MiB) Viewed 4311 times
-
- IMG_20210503_170756.jpg (2.85 MiB) Viewed 4311 times
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
-
- Trainee Fireman
- Posts: 113
- Joined: Tue Oct 13, 2020 9:51 pm
Re: Can you tell what it is yet?
Itβs looking really tidy! I wonder how easy the lining tape Peter mentioned would be to remove if youβre not happy with the end result?-steves- wrote: βMon May 03, 2021 5:42 pm I managed a bit of modelling time today between clearing the garden and sorting out a run to the tip.
So no lining yet, still not sure on my skill level there. The rest of the loco is almost there, a few touch up bits to do, sand pot tops and the windows.
I am quite happy with this so far.
- Peter Butler
- Driver
- Posts: 5243
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Can you tell what it is yet?
The lining tape is easy to remove, or alter, without leaving marks on the paintwork. It is necessary to give a coat of lacquer to keep it firmly in place, so make sure you are happy first!
The best things in life are free.... so why am I doing this?
Re: Can you tell what it is yet?
Very nice indeed. Enjoyable discussion on how some of it has been achieved too.
Iβve droned on about this before (apologies) but playing with plasticard and conventional materials, to attempt this sort of thing, can just look like barking up the wrong tree now. Gosh.
Iβve droned on about this before (apologies) but playing with plasticard and conventional materials, to attempt this sort of thing, can just look like barking up the wrong tree now. Gosh.
Re: Can you tell what it is yet?
That is shaping up to be a really nice loco Steve. Lining with Trimline tape will be a good start to providing the 'finishing touches'. Like you, I've been in possession of a lining pen for many years, and have yet to use it in 'anger'. Not possessing a 3d printer, I was hoping to treat myself to a PDF Fairlie's Double - hopefully someone will be able to continue the business.
Phil
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Plasticard still has a place for me, sometimes it's nice to just "kit bash" something up rather than have to go into in depth design first. For corners and detail, 3D printing does come into it's own, but it does come with it's own pro's and con's, like learning a CAD program, that's quite a steep learning curve, or it was for me, whereas a plate plate can't be beaten in plasticardBertieB wrote: βMon May 03, 2021 9:03 pm Very nice indeed. Enjoyable discussion on how some of it has been achieved too.
Iβve droned on about this before (apologies) but playing with plasticard and conventional materials, to attempt this sort of thing, can just look like barking up the wrong tree now. Gosh.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
I may order some enamal paints and give it a go, who knows. I will be looking for lining tape and seeing what I can find. I have used water slides before and they are holding up well on one of my steamers.Lonsdaler wrote: βTue May 04, 2021 9:56 am That is shaping up to be a really nice loco Steve. Lining with Trimline tape will be a good start to providing the 'finishing touches'. Like you, I've been in possession of a lining pen for many years, and have yet to use it in 'anger'. Not possessing a 3d printer, I was hoping to treat myself to a PDF Fairlie's Double - hopefully someone will be able to continue the business.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
Managed to design and print some sand pot handles today as well as fit the opening windows, not much more to do other than the dreaded lining, which I just don't know what direction that will take in all honesty.
- Attachments
-
- IMG_20210504_154350.jpg (3.03 MiB) Viewed 4324 times
-
- IMG_20210504_154402.jpg (2.97 MiB) Viewed 4324 times
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Re: Can you tell what it is yet?
I used to use Humbrol, back in the day when it was Humbrol. Haven't tried it with the more recent stuff though.
These days I think I'd be tempted to give it a go with acrylics and a Bow pen. That way, if you get a nasty, a drop of water will have it off without any problems. Try it on a piece of scrap before you let loose on the loco though.
Philip
- -steves-
- Administrator
- Posts: 2440
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Can you tell what it is yet?
I gave the loco a very short test run today on my step father's track, to say the least they were very pleased with it. The motion is just so controllable, I couldn't believe just how well it ran, I too was also very pleased with it.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Who is online
Users browsing this forum: No registered users and 3 guests