Vale of Fairway

A place for the discussion of garden railways and any garden style/scale portable and/or indoor layouts
User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: Vale of Fairway

Post by Andrew » Wed Jun 27, 2018 1:44 pm

FWLR wrote: Wed Jun 27, 2018 7:14 am show’s that you don’t need to make a model in 4 days.
Absolutely! I'm full of admiration for those that do, but equally inspired by those who manage to maintain momentum for a project over a long period - I tend to snatch my modelling time from the rest of the day in hour long chunks and often only manage two or three of those a week, so any project I start tends to take a long time to complete...

It's already a lovely looking model, the wood looks great, looking forward to seeing more...

All the best,

Andrew.

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Vale of Fairway

Post by bazzer42 » Wed Jun 27, 2018 9:37 pm

20180627_203220.jpg
20180627_203220.jpg (220.72 KiB) Viewed 4698 times
20180627_213141.jpg
20180627_213141.jpg (178.51 KiB) Viewed 4698 times
An afternoon trying to build a match truck for the crane backfired when I found coupling heights were too far out. Never mind, tipper 29 has joined the fleet but needs a weathered chassis.

Wasn't convinced that trying to stick corrugated plastic to the roof would have been successful in the heat. The easy side was laid in the cool this evening hence the dark photo. Gut feeling tells me some nail art rivets along the roof would add some interest.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Vale of Fairway

Post by tom_tom_go » Wed Jun 27, 2018 9:40 pm

The joy of 7/8ths, larger buildings!

Love it, very convincing...

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: Vale of Fairway

Post by Andrew » Thu Jun 28, 2018 8:25 am

bazzer42 wrote: Wed Jun 27, 2018 9:37 pm Gut feeling tells me some nail art rivets along the roof would add some interest.
Always!

Probably more to scale for 7/8ths too... Despite not having done a huge amount of modelling of late I'm about to start my second box of nail art gems - I can't have used over 1,000 already, can I?!

The building's really looking very good indeed... Where do you get your corrugated iron from - and do you think it would do in 16mm? I'm starting to plan a small station building based on the (old) WHR one at Nantmor...

Cheers,

Andrew.

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: Vale of Fairway

Post by IanC » Thu Jun 28, 2018 10:40 am

Andrew wrote: Thu Jun 28, 2018 8:25 am I'm starting to plan a small station building based on the (old) WHR one at Nantmor...

Cheers,

Andrew.
I agree, it looks good.

I like the old Nantmor station. I had a similar one by Wills on a OO gauge layout. A similar one may appear on my railway when it gets built. Are there any drawings for it or plans?

Ian
Ian

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: Vale of Fairway

Post by Andrew » Thu Jun 28, 2018 11:21 am

IanC wrote: Thu Jun 28, 2018 10:40 am I like the old Nantmor station. I had a similar one by Wills on a OO gauge layout. A similar one may appear on my railway when it gets built. Are there any drawings for it or plans?

Ian
Well, there's this one, which I drew at lunchtime yesterday!
Plan.jpg
Plan.jpg (193.69 KiB) Viewed 4588 times
Just a doodle really, to see whether it would look OK using Jackson Miniatures windows, which aren't as tall as the originals. I reckon it'll do. Inspired by this thread I plan to construct the body of the building in foamboard and then clad it in corrugated plastic sheet...

I did come across some small drawings of the modern shelter at Pont Croesor (based on the original at Ynysfor) in the WHR heritage Group journal - https://www.welshhighlandheritage.co.uk ... -No-48.pdf. A little smaller than Nantmor, but it might suit your needs?

Apologies for thread hi-jack by the way...

Cheers,

Andrew.

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Vale of Fairway

Post by bazzer42 » Thu Jun 28, 2018 12:46 pm

Andrew wrote: Thu Jun 28, 2018 8:25 am
bazzer42 wrote: Wed Jun 27, 2018 9:37 pm Gut feeling tells me some nail art rivets along the roof would add some interest.
Always!

Probably more to scale for 7/8ths too... Despite not having done a huge amount of modelling of late I'm about to start my second box of nail art gems - I can't have used over 1,000 already, can I?!

The building's really looking very good indeed... Where do you get your corrugated iron from - and do you think it would do in 16mm? I'm starting to plan a small station building based on the (old) WHR one at Nantmor...

Cheers,

Andrew.
Nail art rivets seem to disappear at an alarming rate! The corrugated I have used is 1/12 scale dolls house sheets from eBay (Melody Jane). I guess they are marginally overscale for me and probably so for 16mm. That said I wouldn't say there is much difference between these sheets and baked bean cans. I could stick a sliver in the post if you want to try before you buy. I struggled to find good corrugated in 16mm I must admit.

PS 4D model supplies do sheets of 4mm and 6mm styrene sheet corrugated £12 a sheet though.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: Vale of Fairway

Post by Andrew » Thu Jun 28, 2018 2:01 pm

Thank you, that's a very kind offer. I had a look at the Melody Jane website though, and the image shows it with a 10 pence piece, and i think it will be a little too large. I think I'll probably go with Tenmille asbestos sheet - that's intended for Gauge One and I think scales about right for 16mm corrugated iron, even if it is a little pricier than I'd like. I did try making my own with a crafting "crimper" but didn't have much luck there - it's such a signature feature of the old WHR that I'd like to get it right...

Thanks again,

Andrew.

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Vale of Fairway

Post by bazzer42 » Thu Jun 28, 2018 7:35 pm

20180628_192032.jpg
20180628_192032.jpg (202.71 KiB) Viewed 4549 times
Probably a wise decision Andrew , it is quite chunky even in 7/8th. I've managed to clad the whole roof, bit of a cock up with my overlaps on the side extension but would you know if I hadn't confessed? In fact cock ups are a bit of a feature on my line :D

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Vale of Fairway

Post by tom_tom_go » Thu Jun 28, 2018 7:54 pm

Looks fine to me!

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: Vale of Fairway

Post by philipy » Thu Jun 28, 2018 8:29 pm

That is really looking the biz! Bit of weathering, and rust on the lower edges of the sheets and job done.
No, and I'm not sure what your cock up was even with knowing there is something to look for?
Philip

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: Vale of Fairway

Post by Peter Butler » Thu Jun 28, 2018 9:36 pm

A most satisfactory result.... that should fulfil your vision of what it would look like when complete.
The best things in life are free.... so why am I doing this?

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: Vale of Fairway

Post by IanC » Thu Jun 28, 2018 11:13 pm

It looks good to me too. I can't see any cock ups. A bit of weathering on the roof and you'll be able to sit back and admire your handiwork.

Ian
Ian

User avatar
Dwayne
Trainee Driver
Trainee Driver
Posts: 681
Joined: Mon Jul 04, 2011 12:15 am
Location: Oklahoma City

Re: Vale of Fairway

Post by Dwayne » Fri Jun 29, 2018 1:03 am

I like it. :thumbup:

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Vale of Fairway

Post by ge_rik » Fri Jun 29, 2018 7:52 am

It just gets better and better!

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Vale of Fairway

Post by bazzer42 » Mon Jul 02, 2018 8:33 pm

20180702_200714_20180702202444390.jpg
20180702_200714_20180702202444390.jpg (196.16 KiB) Viewed 5145 times
20180702_185649.jpg
20180702_185649.jpg (172.02 KiB) Viewed 5145 times
Half an hour with some nail art rivets and we have nailed panels. Painted and some iron powder underneath to hopefully breakout in rust at some point.

Treated myself to some printed goodies and managed to clean up and then dirty a couple of Jerry cans.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Vale of Fairway

Post by tom_tom_go » Mon Jul 02, 2018 8:37 pm

Petrol cans on a roof, boom...

The roof looks great!

jim@NAL
Driver
Driver
Posts: 1115
Joined: Sun Sep 23, 2012 11:01 am
Location: haverhill suffok

Re: Vale of Fairway

Post by jim@NAL » Mon Jul 02, 2018 11:00 pm

Love it great looking building

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Vale of Fairway

Post by FWLR » Fri Jul 06, 2018 8:04 am

Derek, look at some old photos of corrugated roofs and sides of buildings and you may find that the sheets are all over the place sometimes and even bodged up repairs. So don’t worry too much about cockup’s mate, there seems to much emphasise on getting the correct scale nowadays…it’s your line Derek and you have and do what you what on it… :thumb right: :thumb right:

Your buildings look brilliant for me.. :thumbright: :thumbright: :thumbright:

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: Vale of Fairway

Post by philipy » Fri Jul 06, 2018 8:10 am

Looking better and better Derek
Philip

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests