The (Windmill Hill) Welsh Highland Railway

A place for the discussion of garden railways and any garden style/scale portable and/or indoor layouts
User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: The (Windmill Hill) Welsh Highland Railway

Post by philipy » Sun Jun 30, 2019 3:21 pm

That all looks superb, Andrew. Worth all the hard work and frustration.
Philip

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: The (Windmill Hill) Welsh Highland Railway

Post by FWLR » Mon Jul 01, 2019 7:32 am

Looking good Andrew. Some very good photos of a great looking line. :thumbright:
Last edited by FWLR on Tue Jul 02, 2019 6:42 am, edited 1 time in total.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by Andrew » Mon Jul 01, 2019 8:42 am

Morning all,

Here are a few more photos from yesterday, the afternoon this time.

First, here's Russell on the passenger train:

Russell passenger 1.jpg
Russell passenger 1.jpg (401.44 KiB) Viewed 5592 times
Russell passenger 2.jpg
Russell passenger 2.jpg (429.68 KiB) Viewed 5592 times
Russell passenger 3.jpg
Russell passenger 3.jpg (396.3 KiB) Viewed 5592 times
Russell passenger 4.jpg
Russell passenger 4.jpg (343.08 KiB) Viewed 5592 times

I'm pleased to report that the Summer Car ran beautifully - phew!

Next up, "Jonah", my RH Bertie trundled the slate wagons about:

Bertie slate 1.jpg
Bertie slate 1.jpg (321.07 KiB) Viewed 5592 times
Bertie slate 2.jpg
Bertie slate 2.jpg (468.4 KiB) Viewed 5592 times
Bertie slate 3.jpg
Bertie slate 3.jpg (394.93 KiB) Viewed 5592 times
Bertie slate 4.jpg
Bertie slate 4.jpg (435.04 KiB) Viewed 5592 times
Bertie slate 5.jpg
Bertie slate 5.jpg (306.64 KiB) Viewed 5592 times

I'd been meaning to run that combination of loco and stock since I built the wagons, and I am rather pleased with how it looked. Again, everything ran well, but I was reminded that a slip eccentric loco's not really ideal for my end-to-end line - I've got to get selling/saving for a Lilla!

Lastly, I posed a few shots at the end of day, just for fun:

Russell and Bertie 1.jpg
Russell and Bertie 1.jpg (396.13 KiB) Viewed 5592 times
Russell and Bertie 2.jpg
Russell and Bertie 2.jpg (400.56 KiB) Viewed 5592 times
Russell and Bertie 3.jpg
Russell and Bertie 3.jpg (402.95 KiB) Viewed 5592 times

You'll see that "Margaret" crept into the last shot, and a proper thing too - she was the unsung heroine of the day, tirelessly shunting and positioning trains for the stars of the show...

All in all, a good day. I'm looking forward to enjoying some more soon...

Cheers,

Andrew.

User avatar
Dwayne
Trainee Driver
Trainee Driver
Posts: 681
Joined: Mon Jul 04, 2011 12:15 am
Location: Oklahoma City

Re: The (Windmill Hill) Welsh Highland Railway

Post by Dwayne » Mon Jul 01, 2019 1:31 pm

:thumbright:

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: The (Windmill Hill) Welsh Highland Railway

Post by FWLR » Tue Jul 02, 2019 6:46 am

Brilliant photos again Andrew. I do love seeing your loco's on the line. They are very atmospheric in their work... :thumbright:

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by Andrew » Wed Jul 03, 2019 12:13 pm

It seems it's not just us railway modellers who find it more convenient to glue their ballast in place. Not my photo, but I spotted this at Paddington yesterday:


Image


Quite realistic, don't you think??? I'd like to see the size of the syringe/turkey baster they used to apply the SBR with though...

Cheers,

Andrew.

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: The (Windmill Hill) Welsh Highland Railway

Post by philipy » Wed Jul 03, 2019 12:51 pm

Andrew wrote: Wed Jul 03, 2019 12:13 pm It seems it's not just us railway modellers who find it more convenient to glue their ballast in place.

Quite realistic, don't you think??? I'd like to see the size of the syringe/turkey baster they used to apply the SBR with though...
Probably use one of those weed sprayers with long arms sticking out the sides. :lol: :lol:
Great spot though Andrew, priceless.
Think I'll have to make some of those up, 6" intervals all round my line?? :shock:
Philip

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by ge_rik » Wed Jul 03, 2019 12:55 pm

Bootiful photos, Andrew. Those coaches look just right in the garden setting.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by Andrew » Sun Sep 01, 2019 5:49 pm

Afternoon all!

Apologies, it's been yonks since I've been on the Forum, partly because I've spent the last two weeks away in the beautiful Orkney Islands...

As ever, I got back from holiday keen to crack on with the railway, starting with cutting the grass and tidying the garden in order to find the track in the first place. I had thought about running a train but that's not quite happened, but I did take advantage of this afternoon's sunshine to crack on with the ballasting.

I got the pointwork at the top end of Penlan station levelled, ballasted and glued - here it is with the SBR freshly applied:

Ballasted points.jpg
Ballasted points.jpg (387.16 KiB) Viewed 5227 times

There's just the stretch of line that goes under the deck and the curve under the swing chair to adjust and ballast now - I might just get it done before passenger services cease for the winter. The locals may not consider this a great hardship - there have been a grand total of two passenger trains so far this year, both on the same day!

Cheers,

Andrew.

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: The (Windmill Hill) Welsh Highland Railway

Post by FWLR » Mon Sep 02, 2019 8:29 am

Thats the problem with going away Andrew, doing all those jobs again that you did before you went.... :roll: :roll:
The weather this year is making things grow so fast, especially the grass and those flipping weeds..... :x

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by Andrew » Mon Sep 16, 2019 12:35 pm

Hello all,

The weekend's good weather gave me the opportunity to continue with ballasting work. The difficult to reach stretch beneath the deck and swing sofa was lifted, the trackbed cleared of obstacles and the whole lot realigned, before ballasting and leveling with granite chippings. It's been a somewhat troublesome stretch for a couple of years now, so I wanted to give it a test run before glueing down the ballast. I assembled a test train which included my two most track-shy carriages, the FR-style composite and WHR Summer Car, both of which have been prone to the "bow string effect" in the past.

With my Regner loco in charge of the test rake, I'm pleased to report that the stretch of track in question passed with flying colours, even if I did run into problems elsewhere with encroaching vegetation and buffer-locking because I lazily attempted to reverse the whole train back down the line rather than run round properly!

Anyway, here are some pictures, taken as the light began to fade:

Passenger test 1.jpg
Passenger test 1.jpg (434.78 KiB) Viewed 5075 times
Passenger test 2.jpg
Passenger test 2.jpg (353.01 KiB) Viewed 5043 times
Passenger test 3.jpg
Passenger test 3.jpg (415.68 KiB) Viewed 5075 times
Passenger test 4.jpg
Passenger test 4.jpg (265.52 KiB) Viewed 5043 times


The last picture represents the first time passenger stock has reached Clarach for yonks - I'll try to run a proper passenger service before the end of the season...

I liked how the third one came out, very "light railway", and pretty "Welsh Highland" despite the motive power - I was lucky to get it though, a split second after it was taken the loco derailed on that tuft of moss! As I went to sleep last night the afternoon's running was bringing back vague memories of a childhood visit to the Isle of White steam railway in the early 80s - green paneled carriages, a green loco, and green countryside...

Cheers all,

Andrew.
Last edited by Andrew on Mon Sep 16, 2019 5:28 pm, edited 1 time in total.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by tom_tom_go » Mon Sep 16, 2019 1:03 pm

Brilliant photos Andrew, the best I have seen in a long while that capture running trains in the garden at home.

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: The (Windmill Hill) Welsh Highland Railway

Post by philipy » Mon Sep 16, 2019 2:34 pm

As Tom said, 'Brilliant', Andrew, just lovely.
Philip

User avatar
Lonsdaler
Driver
Driver
Posts: 1226
Joined: Tue May 20, 2014 9:50 am
Location: North Yorkshire

Re: The (Windmill Hill) Welsh Highland Railway

Post by Lonsdaler » Mon Sep 16, 2019 7:50 pm

I like the second photo too - all capture that bucolic narrow gauge mood, imho.
Phil

Sporadic Garden Railer who's inconsistencies know no bounds

My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077

User avatar
Dwayne
Trainee Driver
Trainee Driver
Posts: 681
Joined: Mon Jul 04, 2011 12:15 am
Location: Oklahoma City

Re: The (Windmill Hill) Welsh Highland Railway

Post by Dwayne » Mon Sep 16, 2019 9:33 pm

:thumbright:

DonW
Fireman
Fireman
Posts: 261
Joined: Mon Jul 22, 2019 12:57 pm
Location: West Somerset

Re: The (Windmill Hill) Welsh Highland Railway

Post by DonW » Wed Sep 18, 2019 5:35 pm

Good photos. All looking very good. I take your point about the IOW steam railway one of my favourites. Proper coaches.

Don

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: The (Windmill Hill) Welsh Highland Railway

Post by FWLR » Thu Oct 17, 2019 8:38 am

Sorry for the late reply Andrew. They are brilliant photos, just looks like a line in beautiful British countryside. :thumbright:

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by Andrew » Fri Oct 18, 2019 10:39 am

Thanks Rod!

I haven't been out in the garden much lately but hope to raise steam this weekend if the weather obliges...

Glad to have you back on the Forum,

Andrew.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: The (Windmill Hill) Welsh Highland Railway

Post by Andrew » Sun Nov 03, 2019 7:04 pm

Good evening!

As I've mentioned before, passenger services on the (WH)WHR don't generally run during the winter. It feels like an occasion that should be marked, so this afternoon I headed out into the garden with two aims in mind - to operate the last passenger train of the year, and to run my newly-extended Welsh Highland goods train for the first time. The trains looked good lined up at Trefechan, but things didn't go entirely to plan...

End of season 1.jpg
End of season 1.jpg (405.4 KiB) Viewed 5693 times


Attempt 1.

The real WHR's WD Baldwin was rough riding and temperamental, so kept to goods work whenever possible. As such, my Accucraft version of the loco seemed the perfect choice for my own WHR goods, so I took it down from its shelf for the first time in months. I think it's fairly likely that the receiver batteries were flat, but I didn't get as far as finding out because the (ludicrously over-complicated) transmitter is shared between the Baldwin and my (more recently used) BH Bertie, and I couldn't remember how to switch between them! It's happened before, and I've resolved it by looking up the instructions online, but with the light fading I decided to go to Plan B...

Attempt 2.

My RH Russell would also look the part on the goods, and go well with the NWNGR 4 wheelers in the passenger rake too, so that came down from the shelf next. I raised steam without too much difficulty and Russell headed down the line to pick up the train. The trip back up to Clarach was fairly uneventful, and the train certainly looked very nice, but trouble lay ahead - I couldn't get the bloomin' loco into reverse! Not sure what the problem is there, but I couldn't resolve it on the spot, and so - with my end-to-end line - the train was stuck at the terminus...

End of season 2.jpg
End of season 2.jpg (421.51 KiB) Viewed 5693 times
End of season 3.jpg
End of season 3.jpg (393.43 KiB) Viewed 5693 times

Attempt 3.

Determined to finish the job I returned once more to the loco shelf and retrieved my trusty RH "Little John" - only to find that I'd left it switched on, and so it was without juice...

Attempt 4.

If all else fails, I reach for "Daisy", my Regner Konrad. All wasn't entirely well with her, her pressure gauge seems to have stuck, but - as ever - she got the job done, rescuing the passenger train and trundling the good up and down the line. Phew!


End of season 4.jpg
End of season 4.jpg (277.44 KiB) Viewed 5693 times
End of season 5.jpg
End of season 5.jpg (384.32 KiB) Viewed 5693 times
End of season 6.jpg
End of season 6.jpg (405.54 KiB) Viewed 5693 times
End of season 7.jpg
End of season 7.jpg (334.54 KiB) Viewed 5693 times
End of season 8.jpg
End of season 8.jpg (355.77 KiB) Viewed 5693 times

We've made it to the end of the season, just, but there's clearly work to be done before next year's passenger services commence!

Cheers all,

Andrew.

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: The (Windmill Hill) Welsh Highland Railway

Post by LNR » Sun Nov 03, 2019 11:17 pm

Andrew,
I can so relate to your problems, I run quite a few radio controlled boats and it wouldn't be the first time I have arrived at the lake to realise I have packed the wrong transmitter or wrong battery pack.
Those rather large Regner pressure gauges do seem to have sticking problems if not regularly used, and my Lumberjack has suffered the same problem. A very gentle tap with something metal generally does the trick in my case. Upon opening mine up, I see that the gauge has a plastic quadrant and gear with terribly fine teeth in it and think this maybe the cause.
The goods train certainly looks the business, and I do like the weathering on the WD, D class bogie open. I remember when you first posted the pics. of the two of them, I had to put them on file for future reference.
Grant.

Post Reply

Who is online

Users browsing this forum: sjrixon and 6 guests