The Two Dogs Mining Company
Re: The Two Dogs Mining Company
The girls do me good now that I'm a bachelor. Having said that, when they are both gone there won't be any more pups in my life. My future plans when I hopefully retire in six years are to spend summers traveling around Alaska and Canada (where most of my family still lives). I'd also like to travel further abroad on this spinning rock from time to time... Europe, Asia, S. America, Russia.
Re: The Two Dogs Mining Company
Alrighty then... spent some time fussing with the first of three right-hand switches. Temporary test fitting in the photo.
Previous switches were of blade design. In keeping with the mining theme of the new layout these will be of 'stub' design.
---
Previous switches were of blade design. In keeping with the mining theme of the new layout these will be of 'stub' design.
---
Re: The Two Dogs Mining Company
One of seven completed.
---
---
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
Re: The Two Dogs Mining Company
Hi Dwayne,
Nice work again. I like the stub point idea. It's a good start. You're making better progress than my current turnout build - it's been on the bench for well over a month now! I'm looking forward to seeing your track start to grow on the new railway.
All the best,
Andrew
Nice work again. I like the stub point idea. It's a good start. You're making better progress than my current turnout build - it's been on the bench for well over a month now! I'm looking forward to seeing your track start to grow on the new railway.
All the best,
Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"
"'cause I can't manage on three gaffer!"
Re: The Two Dogs Mining Company
Thanks Andrew. I've knocked out three over the past three evenings. The goal is to do one each evening.
---
---
Re: The Two Dogs Mining Company
Excellent! You've already surpassed my turnout making total ..... well actually you surpassed it on the first evening!!!
One day, I will have to have a go. I've always fancied trying to make some dual gauge pointwork. But maybe I should start with something simpler....
Rik
One day, I will have to have a go. I've always fancied trying to make some dual gauge pointwork. But maybe I should start with something simpler....
Rik
Re: The Two Dogs Mining Company
There's satisfaction in building your own. It's not that difficult.
Re: The Two Dogs Mining Company
That's what all the experts say ....... Which is presumably why they are experts
Rik
Re: The Two Dogs Mining Company
Expert needed here also Rik..
Dwayne I am in envy of your turnout build. It a joy to see. Can I ask, is the rail bender made from wheels. It is a brilliant well made item. I am thinking if they are turned upside down they could be used for pipe bending.
Those machines are a tad expensive.
PS I am not getting notifications again. It's not just from yours either...
Dwayne I am in envy of your turnout build. It a joy to see. Can I ask, is the rail bender made from wheels. It is a brilliant well made item. I am thinking if they are turned upside down they could be used for pipe bending.
Those machines are a tad expensive.
PS I am not getting notifications again. It's not just from yours either...
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: The Two Dogs Mining Company
Rod, here are two photos of my railbender. It was built by a late friend of mine who was a machinist. He machined the rollers to work with the code 250 rail I use. Each roller rides on bearings for smooth rotation. It is a great machine.
---
---
- gregh
- Trainee Driver
- Posts: 570
- Joined: Sun Apr 01, 2018 5:44 am
- Location: Sydney, Australia
- Contact:
Re: The Two Dogs Mining Company
Excuse my ignorance, but how does your stub point work?
I can see that the converging end must move by a few mm to allow the rails to line up for each of the diverging and straight routes.
Does that mean there is some 'pivot' point up at the other ( divergent) end? If so, does that mean the whole point is screwed down to a 'baseboard' at that end?
Are there rail joiners on the 4 rails at that end?
A pic of one installed would probably answer all my questions.
I can see that the converging end must move by a few mm to allow the rails to line up for each of the diverging and straight routes.
Does that mean there is some 'pivot' point up at the other ( divergent) end? If so, does that mean the whole point is screwed down to a 'baseboard' at that end?
Are there rail joiners on the 4 rails at that end?
A pic of one installed would probably answer all my questions.
Greg from downunder.
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
The Sandstone & Termite's website: https://members.optusnet.com.au/satr/satr.htm
Re: The Two Dogs Mining Company
Your late friend did a superb job with it Dwayne. Very impressed. Now I need to find someone to make me one. I would have done myself, but I don't have the machinery anymore.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: The Two Dogs Mining Company
Greg... these are the primary component of a stub switch. The rails that lead into the switch that move side to side will be installed when the switch is positioned in place. It'll be a bit before I actually begin laying track because of the weather.
Two Dogs Mining Company Declares Bankruptcy
Times are tough and the latest news here is that the Two Dogs Mining Company has gone bankrupt before one foot of track was able to be laid.
---
The real story is that with the recent enactment of masks mandates here in OKC on July 20 for the fake virus, my employer had instituted the requirement that all employees must wear a mask.
As former USAF military cop and supporter of the US Constitution and the Natural Rights of being a free man... I refused to comply. The resulting action being that I was left with little choice but to quit.
With enough funds in my bank account to tide me over for a few months I have been taking it easy with an abundance of spare time on my hands.
A day or so later I was looking over the layout with a critical eye. And came to the conclusion that what I had thus far constructed wasn't working for me. And began the process of dismantling the layout. I'm getting good at this it seems.
What does the future hold?
Well, aside from finding another job once September arrives and the lifting of the unconstitutional mask mandate by the mayor and his control freak city council minions... I will build a layout come hell or high water.
I'm going to chill for a week or two now that the layout has been dismantled. I need to polish my employment resume and start the process of hunting a new job in the coming weeks while giving some thought to what to do about having a layout.
Stay tuned...
---
---
The real story is that with the recent enactment of masks mandates here in OKC on July 20 for the fake virus, my employer had instituted the requirement that all employees must wear a mask.
As former USAF military cop and supporter of the US Constitution and the Natural Rights of being a free man... I refused to comply. The resulting action being that I was left with little choice but to quit.
With enough funds in my bank account to tide me over for a few months I have been taking it easy with an abundance of spare time on my hands.
A day or so later I was looking over the layout with a critical eye. And came to the conclusion that what I had thus far constructed wasn't working for me. And began the process of dismantling the layout. I'm getting good at this it seems.
What does the future hold?
Well, aside from finding another job once September arrives and the lifting of the unconstitutional mask mandate by the mayor and his control freak city council minions... I will build a layout come hell or high water.
I'm going to chill for a week or two now that the layout has been dismantled. I need to polish my employment resume and start the process of hunting a new job in the coming weeks while giving some thought to what to do about having a layout.
Stay tuned...
---
Re: The Two Dogs Mining Company
The right decision should never be controlled by the "man" over the next couple of months start a new job as a garden railway engineer and build your layout until something new and deserving of your skills comes along
Who is online
Users browsing this forum: No registered users and 15 guests