(WH)WHR Rolling Stock

Discussion of Rolling Stock related topics should go here
User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: (WH)WHR Rolling Stock

Post by Peter Butler » Sun Aug 12, 2018 1:59 pm

Andrew wrote: Sat Aug 11, 2018 4:37 pm I'm tempted by the timber bolsters too, they'd make a nice model.

Andrew
I thought so too..... these are my scratchbuilt plasticard ones.....
IMG_3211.JPG
IMG_3211.JPG (129.7 KiB) Viewed 6530 times
IMG_3221.JPG
IMG_3221.JPG (126.24 KiB) Viewed 6530 times
The best things in life are free.... so why am I doing this?

User avatar
Gralyn
Fireman
Fireman
Posts: 293
Joined: Thu Aug 07, 2014 12:29 pm
Location: Stockport, United Kingdom
Contact:

Re: (WH)WHR Rolling Stock

Post by Gralyn » Sun Aug 12, 2018 3:09 pm

Very very nice indeed!.
Regards Graham.

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: (WH)WHR Rolling Stock

Post by IanC » Mon Aug 13, 2018 8:46 am

:thumbright: Excellent wagons.
Ian

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: (WH)WHR Rolling Stock

Post by FWLR » Mon Aug 13, 2018 11:40 am

Wow…Brilliant Derek.

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: (WH)WHR Rolling Stock

Post by Peter Butler » Mon Aug 13, 2018 1:56 pm

FWLR wrote: Mon Aug 13, 2018 11:40 am Wow…Brilliant Derek.
Hi Rod, perhaps you might put your glasses on and read it again!!!
(no worries mate)

Peter.
The best things in life are free.... so why am I doing this?

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: (WH)WHR Rolling Stock

Post by IanC » Mon Aug 13, 2018 7:30 pm

Who's Derek? Reminds me of the estate agent advert being shown on TV at the moment. :lol:
Ian

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: (WH)WHR Rolling Stock

Post by FWLR » Tue Aug 14, 2018 8:58 am

Peter Butler wrote: Mon Aug 13, 2018 1:56 pm
FWLR wrote: Mon Aug 13, 2018 11:40 am Wow…Brilliant Derek.
Hi Rod, perhaps you might put your glasses on and read it again!!!
(no worries mate)

Peter.
Oooops, :oops: so sorry Peter..doesen’t take to long for me to get confused…. :lol: :lol: :lol:

Wow…..Brilliant Peter….. :lol: :lol:

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sun Aug 19, 2018 5:28 pm

Afternoon all!

Following a conversation about wagon loads on the (WH)WHR thread on the layouts board, I spent this morning having a go at making a slate load for one of my new wagons. It uses 4mm (?) scale corrugated iron and plasticard "slates" over a foamboard shell - I think it looks OK and will probably make some more in due course.

Here it is in the wagon:
Loaded slate wagon 1.jpg
Loaded slate wagon 1.jpg (323.34 KiB) Viewed 6238 times
And sitting on the lineside:
Loaded slate wagon 2.jpg
Loaded slate wagon 2.jpg (332.51 KiB) Viewed 6238 times
Thanks for inspiring me to crack on with it Philip!

Cheers,

Andrew.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by tom_tom_go » Sun Aug 19, 2018 5:32 pm

That looks bang on Andrew!

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: (WH)WHR Rolling Stock

Post by Peter Butler » Sun Aug 19, 2018 5:47 pm

That is a seriously impressive result Andrew, top marks for that, it looks just right. Nice colouring too, how have you managed that?
The best things in life are free.... so why am I doing this?

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: (WH)WHR Rolling Stock

Post by philipy » Sun Aug 19, 2018 6:59 pm

Does look good, well done.
Obviously didn't take as long to make as you feared? Often the way, it sometimes takes me a while to bite the bullet but then I wonder what I was scared of!
Philip

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sun Aug 19, 2018 8:08 pm

Glad you like it, I was pleased with the result...

Peter, it's just Poundland primer (which comes out slightly darker than a usual grey primer finish), with certain slates (or the corrugations which represent them) picked out in lighter or darker shades using acrylic craft paint. The whole thing was then given a wash of a watery mixture of black and navy blue. I think it's a technique the indoor modellers use for slate roofs.

And Philip, yes, it didn't take too long, a couple of hours - but that's only one! I'll do the next four of this size in a single batch, which should save time, although it might get a bit boring!

Cheers!

Andrew

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: (WH)WHR Rolling Stock

Post by Peter Butler » Sun Aug 19, 2018 8:40 pm

Nothing wrong with Poundland primer... I use it extensively and it is good..... especially for a pound.
The acrylics and wash work well to give it a lift, nice work. I usually add a matt lacquer to keep a 'flat' appearance which would work well on slate I think.
The best things in life are free.... so why am I doing this?

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: (WH)WHR Rolling Stock

Post by ge_rik » Mon Aug 20, 2018 7:03 am

Wow! I honestly thought they were real pieces of slate. I was thinking "That'll be heavy!" Must get off to Poundland for a can of primer - if only it would make my models look that good! Does it contain fairy dust as an additive?

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: (WH)WHR Rolling Stock

Post by philipy » Mon Aug 20, 2018 9:04 am

Peter Butler wrote: Sun Aug 19, 2018 8:40 pm Nothing wrong with Poundland primer... I use it extensively and it is good..... especially for a pound.
I use it too, although the cans are a bit smaller content that a Halfrauds one and the Poundland stuff seems to come in 2 different shades of grey and there is nothing on the cans to distinguish it.
Philip

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: (WH)WHR Rolling Stock

Post by IanC » Mon Aug 20, 2018 12:11 pm

philipy wrote: Mon Aug 20, 2018 9:04 am
Peter Butler wrote: Sun Aug 19, 2018 8:40 pm Nothing wrong with Poundland primer... I use it extensively and it is good..... especially for a pound.
I use it too, although the cans are a bit smaller content that a Halfrauds one and the Poundland stuff seems to come in 2 different shades of grey and there is nothing on the cans to distinguish it.
I must give the poundland stuff a try. Sounds like a bargain, even if shades differ.
Ian

User avatar
GTB
Driver
Driver
Posts: 1550
Joined: Sat Mar 05, 2011 2:46 pm
Location: Australia

Re: (WH)WHR Rolling Stock

Post by GTB » Mon Aug 20, 2018 5:20 pm

Andrew wrote: Sun Aug 19, 2018 5:28 pm I spent this morning having a go at making a slate load for one of my new wagons.
The load looks quite convincing and blends well with the wagon. The texture and colours of the slates at the side of the load really do look like miniature slates.

The weathering on the slate wagons has really brought out the neatness of the wagon construction as well.

Which reminds me..... This is one of those times I'm thankful I don't model a slate quarry. 8)

Regards,
Graeme

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: (WH)WHR Rolling Stock

Post by FWLR » Tue Aug 21, 2018 9:41 am

Brilliant job on the slates Andrew…. :thumbright: :thumbright:

I threw all my foam board away when we moved, mainly because I don’t have the room now in our new place….. :cussing: :cussing:

I will have to come up with something else for mine.

User avatar
JMORG
Trainee Driver
Trainee Driver
Posts: 940
Joined: Fri Dec 09, 2011 1:16 pm
Location: Gloucester

Re: (WH)WHR Rolling Stock

Post by JMORG » Sun Sep 02, 2018 7:10 am

https://www.16mm.org.uk/2018/09/01/sept ... te-wagons/ if anyone is interested in making Andrew's waggons...

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sun Sep 02, 2018 7:48 am

That was quick, I only sent it to Richard yesterday! Having undertaken to write something for on here I thought it might be an opportunity to promote the forum a little so submitted it for the 16mm website instead. Don't tell anyone, but that last picture's a fake - there's no engine on the front of that train, but there is the nozzle of a steam cleaner hidden in the tunnel!

I notice you've gone for the proper Ffestiniog double "g" spelling of wagon/waggon JMORG - I opted for 1 in the article, but gave the Ffestiniog a double "f", which it probably shouldn't have if I'm referring to it by title, particularly in a 1920s context!

Hope the article's useful to anyone who's interested,

Andrew

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests