Larger scale Stuff

Discussion of Live Steam locomotives should be located here
User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Larger scale Stuff

Post by tom_tom_go » Mon Jun 24, 2019 11:33 am

Thanks Jim, I had forgotten the name but the brown coloured loco uses a Dholpur chassis but freelance in appearance.

User avatar
GTB
Driver
Driver
Posts: 1550
Joined: Sat Mar 05, 2011 2:46 pm
Location: Australia

Re: Larger scale Stuff

Post by GTB » Mon Jun 24, 2019 12:31 pm

idlemarvel wrote: Sun Jun 23, 2019 6:51 pm The problem with 3 1/2" (in my eyes) is that you need a raised track so passengers can straddle the rails. Makes points a bit tricky. You can get away with ground level with 5" (I'm hoping this is really true!).
There are a couple of older live steam tracks here in Melbourne with 3.5 "/5" dual gauge track at ground level, one was built that way and the other was built elevated and later lowered to ground level. Locos run on either gauge and the passenger trucks run all on the 5" gauge.

Even 5" gauge is a bit problematic unless you can keep a tight rein on the passengers. On your home track it would be best to sit the grandkids in front of you on the riding truck. That way they can see where they are going and are less likely to lean out, plus you can keep an eye on what they are doing.

Raised tracks are like straddle beam monorails, you can use segmented switches to change route instead of using turnouts.

Regards,
Graeme

Big Jim
Moderator
Moderator
Posts: 2694
Joined: Sat Jul 06, 2013 5:28 pm
Location: Near Llanelli

Re: Larger scale Stuff

Post by Big Jim » Mon Jun 24, 2019 4:42 pm

I have seen some wonderful pictures of people driving 31/2" on the ground. Standard procedure was to lie flat on a long riding truck.
If at first you don't succeed, use a bigger hammer!

User avatar
idlemarvel
Trainee Fireman
Trainee Fireman
Posts: 136
Joined: Tue May 28, 2019 1:59 pm

Re: Larger scale Stuff

Post by idlemarvel » Mon Jun 24, 2019 7:05 pm

GTB wrote: Mon Jun 24, 2019 12:31 pm ...
Even 5" gauge is a bit problematic unless you can keep a tight rein on the passengers. On your home track it would be best to sit the grandkids in front of you on the riding truck. That way they can see where they are going and are less likely to lean out, plus you can keep an eye on what they are doing.
...
Sounds like good advice Graeme, thanks! :-)
Dave Miller
currently building the 5" gauge Circle Line

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Larger scale Stuff

Post by FWLR » Sat Jun 29, 2019 10:11 am

They do look really nice locos Tom, but well out of my league price wise. My older brother has made 4, 5" gauge and a couple of 3 1/2" also. The one he is most proud of has cost £4,000 to build, but he does have one that is worth £28,000...

Needless to say he is a snob when it comes to my 32mm Billy. But at least I can run my Billy with out having to get a lifting platform and start running it after about 5-10 minutes steaming up....I fell asleep waiting for his to get going recently..... :lol: :lol:

Seriously though, I love all forms of gauge, it keeps me fascinated all the time with the power they have no matter what the gauge is running...

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests