Accucraft Yeo
Accucraft Yeo
So apparently I have a Yeo arriving next week... Is there anything different to the normal Accucraft practice with this engine? Has anyone who owns one had any interesting quirks with running them?
Re: Accucraft Yeo
"Apparently"? Is that the sound of extreme good luck?
Re: Accucraft Yeo
Prize draw, I didn't stay for the draw. Came back from the gym with a missed call telling me that I had won.
Are they identical to Lew?
Are they identical to Lew?
Re: Accucraft Yeo
Congratulations,
The only thing I ever seem to win in drawers or raffles are non alcoholic beverages or ladies toiletries.
The only thing I ever seem to win in drawers or raffles are non alcoholic beverages or ladies toiletries.
If at first you don't succeed, use a bigger hammer!
Re: Accucraft Yeo
Sorry Tony I meant mechanically.
I presume they're the same apart from bodywork?
I presume they're the same apart from bodywork?
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Accucraft Yeo
Not to be a bad loser (I didn't enter anyway) but aren't you or your Dad in the trade so you are not allowed to enter?
Re: Accucraft Yeo
My father does make engines, but definitely not as a trader. He's an aerospace engineer by trade and simply makes engines for fun! He doesn't do draws or anything like that.
My sole locomotive is the Moel Tryfan so that doesn't count!
My sole locomotive is the Moel Tryfan so that doesn't count!
Re: Accucraft Yeo
Turns out one of our members bought himself a Taw. Runs very well although cylinders have leaky valve chests; is this a common occurrence?
Re: Accucraft Yeo
I have a Yeo. A few points.... It does not hold a huge quantity of water so that needs some vigilance. When I fitted radio control the reversing lever was going ever so slowly past the “ stop” in forward which affected the performance until I discovered the problem. It had a tendency to slip which I solved by adding metal to the dummy side tanks to increase weight. Two problems, probably more to do with my track than the loco, the cowcatcher can easily come into contact with the rail and I stiffened the springing in the rear pony touch as I was getting occasional derails in reverse. I lost a pin out of the valve gear for no apparent reason. Despite the instructions saying it will run out of water before gas I have found it a little heavy on gas and this not to be the case.
Despite the above it’s a great loco now I have ironed out its foibles. It pulls well and looks good. Well done on winning it.
Despite the above it’s a great loco now I have ironed out its foibles. It pulls well and looks good. Well done on winning it.
Re: Accucraft Yeo
Thanks copea! One of our members has had a Lew for a good few years now and it's a great runner; almost the equal to a Roundhouse (same with his NG15). Unfortunately, my reservations are born from our shared experiences with the NGG16's (both now sorted and running as well as they look) and his current troubles with the K1. I thought I'd ask the question first so I can have some sort of idea if things go wrong!copea wrote: ↑Sat Apr 13, 2019 9:39 pm I have a Yeo. A few points.... It does not hold a huge quantity of water so that needs some vigilance. When I fitted radio control the reversing lever was going ever so slowly past the “ stop” in forward which affected the performance until I discovered the problem. It had a tendency to slip which I solved by adding metal to the dummy side tanks to increase weight. Two problems, probably more to do with my track than the loco, the cowcatcher can easily come into contact with the rail and I stiffened the springing in the rear pony touch as I was getting occasional derails in reverse. I lost a pin out of the valve gear for no apparent reason. Despite the instructions saying it will run out of water before gas I have found it a little heavy on gas and this not to be the case.
Despite the above it’s a great loco now I have ironed out its foibles. It pulls well and looks good. Well done on winning it.
Re: Accucraft Yeo
I do like the loco. If of interest there is a video of my Yeo here https://youtu.be/1oFbkTI0DFc
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Accucraft Yeo
Nice video of your line there.
I think the timing on the loco is out though?
I think the timing on the loco is out though?
Re: Accucraft Yeo
Thanks for your comment. I am relatively new to live steam so am particularly interested in what you say about timing. My understanding with Accucraft is that there is a timing mark on the valve rod. Maybe I need to check this?
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
- dewintondave
- Trainee Driver
- Posts: 697
- Joined: Mon Mar 07, 2011 8:52 am
- Location: New Zealand
Re: Accucraft Yeo
Yeo was dropped off yesterday and runs well! It was late in the evening (after gym) so no pictures yet sorry.
Who is online
Users browsing this forum: No registered users and 17 guests