Page 1 of 1
Bowman 300 chassis
Posted: Sat Jan 05, 2019 8:28 am
by Tony Bird
Hi,
I have been playing with a Bowman 300 chassis
https://youtu.be/BaEyA5QuzZ8
What to do next anyone have a spare body and or Boiler?
Regards Tony.
Re: Bowman 300 chassis
Posted: Sun Jan 06, 2019 1:07 am
by dewintondave
That's lovely Tony. You'll have to make a boiler!
Re: Bowman 300 chassis
Posted: Sun Jan 06, 2019 10:13 am
by Tony Bird
Hi Dave,
That's lovely Tony. You'll have to make a boiler!
Believe it or not someone in another group has offered me an original boiler and another a lend of his 300 to make a copy of its body work; that is if nobody comes up with some body parts.
Regards Tony.
Re: Bowman 300 chassis
Posted: Mon Jan 07, 2019 12:04 am
by dewintondave
That's a great result!
Re: Bowman 300 chassis
Posted: Mon Jan 07, 2019 9:44 am
by Tony Bird
Hi Dave,
Should arrive in a week or so.
Regards Tony.
Re: Bowman 300 chassis
Posted: Mon Jan 07, 2019 9:52 am
by Tony Bird
Hi,
Forgot photograph.
- Edwards boiler LR.jpg (27.03 KiB) Viewed 5360 times
Regards Tony.
Re: Bowman 300 chassis
Posted: Mon Jan 07, 2019 11:44 am
by tom_tom_go
What are the chances of finding that!
Re: Bowman 300 chassis
Posted: Sun Jan 13, 2019 11:01 am
by Tony Bird
Hi,
I have bought some replica Bowman buffers from Toy Train Spares.
- IMG_7241 LR.jpg (89.55 KiB) Viewed 5254 times
And the boiler has arrived.
- IMG_7323 LR.jpg (50.71 KiB) Viewed 5254 times
The paint has been removed.
- IMG_7329 LR.jpg (49.28 KiB) Viewed 5254 times
The boiler looks in reasonable condition with only a couple of issues with some bad soldering on the steam pipe and safety valve bush.
- IMG_7330 LR.jpg (37.71 KiB) Viewed 5254 times
- IMG_7331 LR.jpg (35.35 KiB) Viewed 5254 times
These have been removed and will be replaced along with a hand rail knob which is missing.
I have another project on the go so it might be a bit before I continue with this one.
Regards Tony.
Re: Bowman 300 chassis
Posted: Sun Jan 13, 2019 11:12 am
by tom_tom_go
Hi Tony,
If those parts are silver soldered how did you remove them?
Re: Bowman 300 chassis
Posted: Sun Jan 13, 2019 1:05 pm
by Tony Bird
Hi,
If those parts are silver soldered how did you remove them?
The boiler is soft soldered together, I don't think Bowman ever used hard solder. So it was just a matter of heating the boiler and waiting for the solder to melt before removing the fittings.
Regards Tony.