Merlin Leek and Manifold

Discussion of Live Steam locomotives should be located here
strettonsteamer
Cleaner
Cleaner
Posts: 18
Joined: Tue Mar 28, 2017 11:29 pm
Location: Church Stretton

Re: Merlin Leek and Manifold

Post by strettonsteamer » Mon Jan 28, 2019 11:41 am

Just for info here a couple of images of the Merlin prototype.

Ian
Attachments
Merlin L&M.jpeg
Merlin L&M.jpeg (268.34 KiB) Viewed 7632 times
Merlin L&M2.jpeg
Merlin L&M2.jpeg (319.4 KiB) Viewed 7632 times

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Mon Jan 28, 2019 1:45 pm

Amazing Ian - that's definitely it!!! :thumbright: Are they publicity/development archive photos?
IMG_2922.jpeg
IMG_2922.jpeg (84.14 KiB) Viewed 7616 times
Do you recognise this bogie?
IMG_2918.jpeg
IMG_2918.jpeg (95.56 KiB) Viewed 7616 times
IMG_2919.jpeg
IMG_2919.jpeg (96.5 KiB) Viewed 7616 times

It's difficult to judge the performance at this early stage. We steamed it as a familiarisation exercise on our small garden railway on Saturday and ran it at approx 40psi which in hindsight was probably a little low. Our curves are probably not ideal for the this loco's size either. The regulator was a little on/off but it was not pulling a train. Further testing is required when the weather warms up.

Ian - given the choice what livery would you have chosen?

strettonsteamer
Cleaner
Cleaner
Posts: 18
Joined: Tue Mar 28, 2017 11:29 pm
Location: Church Stretton

Re: Merlin Leek and Manifold

Post by strettonsteamer » Mon Jan 28, 2019 10:19 pm

The photos were taken by my father Don Pearse. They are not copyright or anything. He just used to photograph anything new so we had some images.

As this is the raised bunker loco I think the crimson lake livery would suit it with the single straw coloured lining.

Just out of interest do you know where the loco has been all these years?

Regards

Ian

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Tue Jan 29, 2019 9:12 am

Your father did a great job with the photos. Unfortunately I know none of the history of the loco but it would be interesting to find out. It caught my eye at a recent auction in Macclesfield in December where it was described as....

A part constructed brass scratch built live steam train 'E.R. Calthrop', length approx 43cm.
CONDITION REPORT:
As mentioned, part constructed, certainly not a working model, no information known as to the boiler, etc

I'm originally from Stoke-on-Trent and know the Manifold Valley area well so since becoming interested in garden railways a loco from the L&M appealed and although there was only one photo it looked good enough to take a chance on it. Luckily it's turned out well! There was also a rather nice DJB L&B Yeo (again unpainted and possibly built from a kit) that was out of my price range.

When did you last see the loco - was it still at the Merlin factory when you left?

strettonsteamer
Cleaner
Cleaner
Posts: 18
Joined: Tue Mar 28, 2017 11:29 pm
Location: Church Stretton

Re: Merlin Leek and Manifold

Post by strettonsteamer » Tue Jan 29, 2019 10:24 am

I think the loco was still there in 1986 when Wendy Davies made three of us redundant as 'cost cutting' measures.

She probably sold the model on to raise cash to keep the company afloat. She never liked the L&M model and only liked a model if it was black!

She completely ran the company into the ground. My father and I tried to rescue it in early 1992, but she would not co-operate.

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Wed Jan 30, 2019 9:14 am

I'd better not get it painted black then.
Looking at what you have achieved since those days, I wonder if she wishes she had been more co-operative..........

I'll update on the loco's performance after the next run in the garden - I may need to pick your brains again. Mind you, looking at the forecast we may need to attach the snowplough first.

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Thu Jan 31, 2019 12:05 pm

Having seen mentions of a possible Leek and Manifold loco being developed in previous Steamlines issues (the period garden railway magazine edited by Merlins Tom Cooper) I saw and purchased issue No3 (Jan/Feb 1986) recently. I thought that there may be a slim chance that it may mention our loco again and it arrived this morning. Well to my amazement I found the following....
IMG_2923.jpeg
IMG_2923.jpeg (101.29 KiB) Viewed 7448 times
Firstly, there is a very interesting article by Ian Pearse describing how the 'Beast' was built. This was Ian's own loco that he designed and built based on an extended Hunslet chassis and in the article reveals how he also used it as a test bed for some ideas that Merlin wished to incorporate in the proposed Leek and Manifold locomotive.
IMG_2924.jpeg
IMG_2924.jpeg (96.45 KiB) Viewed 7448 times
Even better, when I turned to page 45 I found this!
IMG_2925.jpeg
IMG_2925.jpeg (88.1 KiB) Viewed 7448 times
Again, photos by Don Pearse showing our Leek and Manifold. So we've now got some very good early history to add to the story but no record of where it has been all these years until now?

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Merlin Leek and Manifold

Post by tom_tom_go » Thu Jan 31, 2019 12:10 pm

This is great work guys, glad the forum is helping bring the history of this loco to the public.

User avatar
TonyW
Driver
Driver
Posts: 1357
Joined: Fri May 16, 2008 9:25 am
Location: North Wales
Contact:

Re: Merlin Leek and Manifold

Post by TonyW » Thu Jan 31, 2019 2:49 pm

I suggest you contact Derek Wiggins and Keith Skillicorn as they are both "well up" on their heritage loco knowledge.

Steaminnthnsw
Cleaner
Cleaner
Posts: 45
Joined: Sat Nov 03, 2018 12:05 am

Re: Merlin Leek and Manifold

Post by Steaminnthnsw » Tue Feb 26, 2019 8:43 pm

Very interesting read. Nice to see you were able to track down it’s history

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Sat Jun 15, 2019 7:29 pm

As promised we took the Merlin for a proper test at our local Reading Group garden railway meeting a couple of weeks ago and I'm pleased to say that it's performance exceeded our expectations.

The venue was Peter and Bruce Dawes superb West Cornwall Light Railway.

Raising steam in the new station area...

IMG_3316.jpeg
IMG_3316.jpeg (133.95 KiB) Viewed 5952 times
IMG_3315.jpeg
IMG_3315.jpeg (125.28 KiB) Viewed 5952 times

In full flight (photo courtesy of Iain Buchanan)...

_DSC1218.jpeg
_DSC1218.jpeg (175.26 KiB) Viewed 5952 times

So all the moving parts received oil and then the burner was lit. It's a little noisier than the Accucraft L&B and it's a relatively large boiler so it took a while to get up to working pressure. Once it did the safety valve opened at 40psi and there was a little condensate to clear with a couple of forwards and backwards runs and then I set off for a full lap. This is a relatively long railway , somewhere in the region of 300 feet per lap and all was well until just after the viaduct when the whole train derailed after tangling with some fast growing Thyme. As it took so long to re-rail the whole train I turned the gas off and it would not re-light while it was so hot. After 5 minutes I tried to re-light it again and this time it did and within a couple of minutes it was up to 30psi and ready to move again. It then ran for 3 or 4 faultless laps which was very pleasing. There is a little steam getting through the disc regulator even when closed so there may be a little work to do there but all in all a very successful outing. There were many kind comments directed it's way from the other group members attending too.


Cooling down in front of the tin mine....
IMG_3325.jpeg
IMG_3325.jpeg (149.42 KiB) Viewed 5952 times
IMG_3326.jpeg
IMG_3326.jpeg (139.84 KiB) Viewed 5952 times


I have a couple of short video clips that I will upload in a few days

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Merlin Leek and Manifold

Post by tom_tom_go » Sat Jun 15, 2019 8:18 pm

It's a great looking loco, looking forward to videos of her running.

User avatar
Soar Valley Light
Driver
Driver
Posts: 1451
Joined: Sun Dec 08, 2013 5:18 pm
Location: North West Leicestershire

Re: Merlin Leek and Manifold

Post by Soar Valley Light » Sat Jun 15, 2019 10:16 pm

Tom's right, that's a lovely machine! I look forward to seeing it develop.

It's a cracking railway too! I wouldn't mind seeing more of that as well.

Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Merlin Leek and Manifold

Post by FWLR » Sun Jun 16, 2019 7:09 am

Hopefully Andrew we will be able to see more of that brilliant looking line and of course your exquisite looking Merlin, George...

She sure does look beautiful. I bet your are so proud to own her.

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Mon Jun 17, 2019 10:02 am

FWLR wrote: ↑Sun Jun 16, 2019 7:09 am Hopefully Andrew we will be able to see more of that brilliant looking line and of course your exquisite looking Merlin, George...

She sure does look beautiful. I bet your are so proud to own her.
Yes of course, it's nice to have something different and it is a lovely looking loco. Mind you I haven't seen a live steam loco I don't like yet!!

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Mon Jun 17, 2019 10:21 am

Another photo taken on the West Cornwall Light Railway.

Crossing the girder bridge
IMG_3306.jpeg
IMG_3306.jpeg (135.11 KiB) Viewed 5753 times

video to follow

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Merlin Leek and Manifold

Post by FWLR » Tue Jun 18, 2019 8:22 am

Brilliant... :thumbright: :thumbright:

User avatar
RobRossington
Trainee Fireman
Trainee Fireman
Posts: 168
Joined: Sun Jan 30, 2011 9:57 pm
Location: Liverpool

Re: Merlin Leek and Manifold

Post by RobRossington » Sat Jun 22, 2019 12:17 pm

An excellent looking machine! Glad it’s all working nicely!

User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Tue Jun 25, 2019 9:10 am

Not the best quality video I'm afraid. Again this was taken at Peter and Bruce Dawes West Cornwall Light Railway. All the buildings you see are miniature versions of buildings in St Just which Peter has scratch built himself!


User avatar
steamgeorge
Trainee Fireman
Trainee Fireman
Posts: 139
Joined: Mon Sep 18, 2017 9:31 am
Location: Oxforshire, UK
Contact:

Re: Merlin Leek and Manifold

Post by steamgeorge » Sat Dec 21, 2019 7:23 pm

Dads Merlin L & M has found a new home, probably the best place it could go. It is with a collector on the south coast who also has the Merlin 'Beast' and a Mac Muckley L & M. He is delighted with it. Sad to see it go but nice to see it being appreciated and being used regularly. We hope to visit one day and see it in its new home.

Regards
George

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest