If possible can anyone with a 3D printer produce lengths of rectangle tube with the following dimensions?
Width = 15mm
Height = 10mm
I need the thickness of the plastic to be 2mm and in black.
I can then cut these into suitable lengths for coupling mounting boxes.
Will pay of course.
Thanks,
Tom
3D print rectangle tube
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: 3D print rectangle tube
Tom,
Sorry I can't volunteer atm because I've got too much else on my plate. However I would say that a tube of those dimensions and undefined length (I'm guessing you are thinkng of say 150mm-ish?)would be difficult. It would be much easier to print multiple individual short pieces at the finished length you need (assuming about 10-15mm?)
Sorry I can't volunteer atm because I've got too much else on my plate. However I would say that a tube of those dimensions and undefined length (I'm guessing you are thinkng of say 150mm-ish?)would be difficult. It would be much easier to print multiple individual short pieces at the finished length you need (assuming about 10-15mm?)
Philip
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: 3D print rectangle tube
Individual short lengths of 7mm would be better a anyway.
Thanks for responding though.
Thanks for responding though.
Re: 3D print rectangle tube
10 x15 x7mm long should be no probs. If nobody else can help and you can wait 2 or 3 weeks I'll have go. How many do you need?
Philip
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: 3D print rectangle tube
Thank you.
I can wait so please contact me when you are free.
I can wait so please contact me when you are free.
Who is online
Users browsing this forum: No registered users and 3 guests