Hi guys,
Does anyone have a picture of the Baldwin cab back from Jurassic? Also (more importantly), do they still make them?
Jurassic models Baldwin cab back kit
Re: Jurassic models Baldwin cab back kit
Hello!
Sorry, a little late in the day (I've not been around much!), but if it's still of use, here's the Jurassic Baldwin cab back:
It's designed to slot right down into the bunker, but I had to modify it because that's where the RC kit lives on mine. The kit leaves you to sort the roof out for yourself too - not too much problem for a metalworker perhaps, but it took me several attempts to get right. I made a wooden roof in the end (with additional supports inside), not perfect, but it looks OK from most angles. Well, as far is it can look OK when the real thing looks like it's been made from the station master's potting shed...
I'm afraid I don't know whether they're still available...
All the best,
Andrew.
Sorry, a little late in the day (I've not been around much!), but if it's still of use, here's the Jurassic Baldwin cab back:
It's designed to slot right down into the bunker, but I had to modify it because that's where the RC kit lives on mine. The kit leaves you to sort the roof out for yourself too - not too much problem for a metalworker perhaps, but it took me several attempts to get right. I made a wooden roof in the end (with additional supports inside), not perfect, but it looks OK from most angles. Well, as far is it can look OK when the real thing looks like it's been made from the station master's potting shed...
I'm afraid I don't know whether they're still available...
All the best,
Andrew.
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Jurassic models Baldwin cab back kit
I remember you doing this Andrew, looks good to me.
A proper narrow gauge make do and mend!
A proper narrow gauge make do and mend!
Re: Jurassic models Baldwin cab back kit
Might be worth an email to Mike.
mike.jurassic@btinternet.com
mike.jurassic@btinternet.com
If at first you don't succeed, use a bigger hammer!
Who is online
Users browsing this forum: No registered users and 6 guests