Jurassic models Baldwin cab back kit

Do you have a problem? Here is the place to appeal for help
Post Reply
User avatar
JMORG
Trainee Driver
Trainee Driver
Posts: 940
Joined: Fri Dec 09, 2011 1:16 pm
Location: Gloucester

Jurassic models Baldwin cab back kit

Post by JMORG » Fri Jan 12, 2018 6:36 pm

Hi guys,
Does anyone have a picture of the Baldwin cab back from Jurassic? Also (more importantly), do they still make them?

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: Jurassic models Baldwin cab back kit

Post by Andrew » Fri Feb 23, 2018 7:45 pm

Hello!

Sorry, a little late in the day (I've not been around much!), but if it's still of use, here's the Jurassic Baldwin cab back:
Baldwin back.jpg
Baldwin back.jpg (336.31 KiB) Viewed 2349 times
It's designed to slot right down into the bunker, but I had to modify it because that's where the RC kit lives on mine. The kit leaves you to sort the roof out for yourself too - not too much problem for a metalworker perhaps, but it took me several attempts to get right. I made a wooden roof in the end (with additional supports inside), not perfect, but it looks OK from most angles. Well, as far is it can look OK when the real thing looks like it's been made from the station master's potting shed...

I'm afraid I don't know whether they're still available...

All the best,

Andrew.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Jurassic models Baldwin cab back kit

Post by tom_tom_go » Fri Feb 23, 2018 8:45 pm

I remember you doing this Andrew, looks good to me.

A proper narrow gauge make do and mend!

Big Jim
Moderator
Moderator
Posts: 2694
Joined: Sat Jul 06, 2013 5:28 pm
Location: Near Llanelli

Re: Jurassic models Baldwin cab back kit

Post by Big Jim » Sat Feb 24, 2018 11:23 am

Might be worth an email to Mike.
mike.jurassic@btinternet.com
If at first you don't succeed, use a bigger hammer!

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests