Garden Railway Forum

Such patience Rik!

A couple of weeks since I posted on progress. The walls are now more or less finished and now assembled. Still need to do a bit of filling and scribing on the corners but will soon be ready for painting. . . .
The components for the canopy and the two lucams are cut out and ready for fitting together and I'm presently slating the main roofs while I wait for the weather to improve so I can get the painting done.

Lost count of how many bricks I've scribed but I think it's 2-3000. Thank goodness I won't need to do those on the back of the building!!

Rik

You must have the patience of a saint, I expect the results to be worth the effort.

Just wonderful Rik, such detailed work getting all of the brickwork to look correctly aligned but well worth all the time spent. Making me wish I had room for more myself, but enough is enough!

Well, it's been a few weeks since my last update and progress has been slow (but steady) for various reasons. Still a fair bit to do (ridge tiles, barge boards, guttering, painting the canopy, and making doors and bespoke windows), but I think I'm at last on the home-straight. . .
Because it will be sited diagonally against a hedge, the building is tapered at the back - this viewpoint will seldom be seen. .
Getting there - albeit slowly

Rik

Absolutely beautiful work Rik, it is a stunning looking structure and well worth the wait.
The final detailing will make it 'real' but the windows will be a chore unless you can get them 3D printed.
I have used printed window frames and they look just fine, they are also an economical solution.

Thanks Peter. I was wondering about 3D printed window frames. Did you get a mate to do them, or have you found an online source?

Rik

Hi Rik, I did get a mate to print the windows but as there are so many printers about at the moment I'm sure there will be someone out there who can help.

These guys do great windows:

https://www.jacksonsminiatures.com

I've found a guy on eBay who sells 3D printed windows. Although these are intended for 00 scale, mine are not too much larger. He indicates he will supply other sizes on request. I've sent him an email with the dimensions for my windows (30mm x 50mm) and am awaiting a response.

https://www.ebay.co.uk/itm/123365204480

Fingers crossed.

Rik

tom_tom_go wrote: ↑Thu Feb 21, 2019 7:33 pm These guys do great windows:

https://www.jacksonsminiatures.com

Thanks Tom
I used their windows on my engine shed, but I've made the windows on the brewery smaller, so need some bespoke ones, unfortunately.

Rik

If the worst comes to the worst, I will use the mesh from the plastic tennis bats as I did for the water mill .....

https://riksrailway.blogspot.com/2017/1 ... ml#windows

Rik

ge_rik wrote: ↑Thu Feb 21, 2019 8:46 pm If the worst comes to the worst, I will use the mesh from the plastic tennis bats as I did for the water mill .....

https://riksrailway.blogspot.com/2017/1 ... ml#windows

Rik

I remember this good idea.

If you can't get a satisfactory response please send me the dimensions and quantity and I will ask my friend, He has done items for me with no problem.

Wow, that is some building. The contrast of the bricks and motor colour is just right.
Does it have a back or just the hedge behind?

ge_rik wrote: ↑Thu Feb 21, 2019 8:23 pm I've found a guy on eBay who sells 3D printed windows. Although these are intended for 00 scale, mine are not too much larger. He indicates he will supply other sizes on request. I've sent him an email with the dimensions for my windows (30mm x 50mm) and am awaiting a response.

https://www.ebay.co.uk/itm/123365204480

Fingers crossed.

Rik

Just heard back and he has some in stock which are more or less the right size for £1 each, plus £1 post overall. He will make bespoke ones for a £4 setting up charge, for future reference. His email address is in the ebay post or you can contact him via his ebay shop if anyone else is interested - https://www.ebay.co.uk/str/jwlikestrain ... 7675.l2563

Rik

Hi Rik. I really don't know how I have missed this thread. What a brilliant idea to make a model out of cardboard first...

The brickwork is excellent Rik, (much better than mine on my garage)....and you have the patience of a Saint doing all that scribing. Love the colours also mate...

gregh wrote: ↑Fri Feb 22, 2019 4:56 am Wow, that is some building. The contrast of the bricks and motor colour is just right.
Does it have a back or just the hedge behind?

Hi Greg
At the moment there is no back. I might remedy that once I site it properly, I'll see how much tweaking I need to do to the hedge, first.
Rik

And what brand of beer will it produce?

BBBB ? named for your 4 stations starting with 'B' ?