Accucraft Axleboxes
Accucraft Axleboxes
I notice that Accucraft axleboxes are available as separate items from suppliers such as Track Shack. I just wondered whether anybody had any experience of using these in scratch building projects?
The reason I ask is because I'm considering using a set of the W&L axleboxes for my sheep wagon project. However, I asked a friend to measure up one of his Accucraft W&L opens for me, and it transpires that the depth of the solebars is 13mm, which is overscale. I was intending to use 9.5mm solebars on my model, which is closer to scale, but presumably this means that the Accucraft axleboxes won't fit. If I fit deeper solebars, the floor height of the completed wagon will be too high.
So I was wondering how easy it might be to cut down or reshape the top section of the axleboxes, that tucks in behind the solebars?
Any advice gratefully recieved
The reason I ask is because I'm considering using a set of the W&L axleboxes for my sheep wagon project. However, I asked a friend to measure up one of his Accucraft W&L opens for me, and it transpires that the depth of the solebars is 13mm, which is overscale. I was intending to use 9.5mm solebars on my model, which is closer to scale, but presumably this means that the Accucraft axleboxes won't fit. If I fit deeper solebars, the floor height of the completed wagon will be too high.
So I was wondering how easy it might be to cut down or reshape the top section of the axleboxes, that tucks in behind the solebars?
Any advice gratefully recieved
I've used them in several projects. I like them, they are easy to fit square and run any axle freely. They even come with small set screws. If you want to cut them in anyway they are tough. I used a grinding wheel to shape a set up to my requirements. They can baulk up width wise. All my Andel models trucks have these on and even a Mamod guards van has them. If you want a photo let me know.
Oh dear...I was worried you might say that Unfortunately I only have basic hand tools available to me at the moment.steamie1:106169 wrote:If you want to cut them in anyway they are tough. I used a grinding wheel to shape a set up to my requirements.
Looks like I'll just have go for the GRS W&L-pattern axleboxes then...trouble is, they're all out and apparently won't have a delivery for several weeks. Oh well!
- Chris Cairns
- Driver
- Posts: 2366
- Joined: Mon Oct 29, 2007 7:25 pm
- Location: Glasgow, Scotland
The Accucraft axleboxes are much sharper cast than some white metal ones I've seen elsewhere.
As you say they are 12.5mm deep below the sole bar, but trimming them to 9.5mm should still allow the original mounting holes to be used. You should be able to trim them to size using a hacksaw & hand file.
Chris Cairns
As you say they are 12.5mm deep below the sole bar, but trimming them to 9.5mm should still allow the original mounting holes to be used. You should be able to trim them to size using a hacksaw & hand file.
Chris Cairns
At least some W&L solebars seem to have been 9 1/2" x 4" which scales out at 12.5mm in 16mm scale. I use the Accucraft W&L castings for my 3' gauge 4wheel wagons and use 1/2" x 1/4" wood for the solebars.MuzTrem:106189 wrote: Hmm...Ok then, worth a try. So how far apart would I need to set my solebars (for 45mm gauge)?
Best to get your wheelsets first, but I make my own and space the solebars at 61mm, which leaves about 0.5mm sideplay on the axles.
I use a standard underframe for my 4 wheelers and made a jig for holding the bits together and square while the glue dries. The write up is here.
http://gardenrails.myfreeforum.org/abou ... highlight=
The axlebox castings are diecast zinc alloy with a brass or bronze bearing insert and the bearing is sized for a 3mm journal on the axle.
1/2" x1/4" scales out at the right size for a W&L solebar in SM45 and is also about right for Irish 3' gauge wagons in 15mm/ft scale, where it scales out at 10".
Something to watch is that some wooden wagon designs had a board along the end of the floorboards that hangs down below the floor. In elevation drawings this can give the impression the solebars are shallower than they really are.....
Regards,
Graeme
Who is online
Users browsing this forum: No registered users and 0 guests